1108632 AXLE GP-DRIVE & STEERING Caterpillar parts
416C, 426C, 428C, 436C, 438C
Rating:
Alternative (cross code) number:
CA1108632
110-8632
1108632
CA1108632
110-8632
1108632
Weight: 742 pounds 336 kg.
BACKHOE LOADER,
Information:
8 Vapor Explosion (Fuel Filter)
Illustration 10 g01407639
One safety message is located on each side of the duplex fuel filter.
Warning: Vapor Explosion. Could cause serious injury or death. Read the Operation and Maintenance Manual before conducting any maintenance on the duplex fuel filter.
9 Canadian Standards Association
Illustration 11 g01667111
If applicable, this safety message is located on the right side of the barrel of the generator.
Separate protection and control must be provided in accordance with the Canadian Electrical Code, part 1.
10 Lifting the Product (Not Including the Radiator)
Illustration 12 g01411376
One safety message is located on each side of the terminal box.
Before lifting the product, read this Operation and Maintenance Manual, "Product Lifting" in the Operation Section.If improper equipment is used to lift the product, injury and damage can occur. Use cables which are properly rated for the weight. Use a spreader bar and attach the cables according to the information on the safety message.
11 Lifting the Product (Including the Radiator)
Illustration 13 g01411378
One safety message is located on each side of the terminal box.
Before lifting the product, read this Operation and Maintenance Manual, "Product Lifting" in the Operation Section.If improper equipment is used to lift the product, injury and damage can occur. Use cables which are properly rated for the weight. Use a spreader bar and attach the cables according to the information on the safety message.
12 Hot Fluid Under Pressure
Illustration 14 g01371640
One safety message is located next to the radiator cap.
Pressurized system! Hot coolant can cause serious burns, injury or death. To open the cooling system filler cap, stop the engine and wait until the cooling system components are cool. Loosen the cooling system pressure cap slowly in order to relieve the pressure. Read and understand the Operation and Maintenance Manual before performing any cooling system maintenance.
13 Lifting the Engine
Illustration 15 g01648201
This safety message may be located on the lifting bail for the engine.
Before lifting the product, read this Operation and Maintenance Manual, "Product Lifting" in the Operation Section.If improper equipment is used to lift the product, injury and damage can occur. Use cables which are properly rated for the weight. Use a spreader bar and attach the cables according to the information on the safety message.
Illustration 10 g01407639
One safety message is located on each side of the duplex fuel filter.
Warning: Vapor Explosion. Could cause serious injury or death. Read the Operation and Maintenance Manual before conducting any maintenance on the duplex fuel filter.
9 Canadian Standards Association
Illustration 11 g01667111
If applicable, this safety message is located on the right side of the barrel of the generator.
Separate protection and control must be provided in accordance with the Canadian Electrical Code, part 1.
10 Lifting the Product (Not Including the Radiator)
Illustration 12 g01411376
One safety message is located on each side of the terminal box.
Before lifting the product, read this Operation and Maintenance Manual, "Product Lifting" in the Operation Section.If improper equipment is used to lift the product, injury and damage can occur. Use cables which are properly rated for the weight. Use a spreader bar and attach the cables according to the information on the safety message.
11 Lifting the Product (Including the Radiator)
Illustration 13 g01411378
One safety message is located on each side of the terminal box.
Before lifting the product, read this Operation and Maintenance Manual, "Product Lifting" in the Operation Section.If improper equipment is used to lift the product, injury and damage can occur. Use cables which are properly rated for the weight. Use a spreader bar and attach the cables according to the information on the safety message.
12 Hot Fluid Under Pressure
Illustration 14 g01371640
One safety message is located next to the radiator cap.
Pressurized system! Hot coolant can cause serious burns, injury or death. To open the cooling system filler cap, stop the engine and wait until the cooling system components are cool. Loosen the cooling system pressure cap slowly in order to relieve the pressure. Read and understand the Operation and Maintenance Manual before performing any cooling system maintenance.
13 Lifting the Engine
Illustration 15 g01648201
This safety message may be located on the lifting bail for the engine.
Before lifting the product, read this Operation and Maintenance Manual, "Product Lifting" in the Operation Section.If improper equipment is used to lift the product, injury and damage can occur. Use cables which are properly rated for the weight. Use a spreader bar and attach the cables according to the information on the safety message.
Caterpillar SIS machinery equipment:
Caterpillar SIS
428C Backhoe Loader 8RN00001-04088 (MACHINE) POWERED BY 3054 Engine »
110-8632
AXLE GP-DRIVE & STEERING
428C Backhoe Loader Side Shift, Parallel Lift 2CR00001-16211 (MACHINE) POWERED BY 3054 Engine »
110-8632
AXLE GP-DRIVE & STEERING
438C Backhoe Loader Side Shift, Single Tilt 1JR00001-01106 (MACHINE) POWERED BY 3054 Engine »
110-8632
AXLE GP-DRIVE & STEERING
438C Backhoe Loader Side Shift, Parallel Lift 1TR00001-01283 (MACHINE) POWERED BY 3054 Engine »
110-8632
AXLE GP-DRIVE & STEERING
416C Backhoe Loader Center Pivot, Single Tilt 5YN00001-15147 (MACHINE) POWERED BY 3054 Engine »
110-8632
AXLE GP-DRIVE & STEERING
416C Backhoe Loader Center Pivot, Parallel Lift 1XR00001-02183 (MACHINE) POWERED BY 3054 Engine »
110-8632
AXLE GP-DRIVE & STEERING
426C Backhoe Loader Center Pivot, Single Tilt 1ER00001-00863 (MACHINE) POWERED BY 3054 Engine »
110-8632
AXLE GP-DRIVE & STEERING
426C Backhoe Loader Center Pivot, Parallel Lift 1NR00001-00953 (MACHINE) POWERED BY 3054 Engine »
110-8632
AXLE GP-DRIVE & STEERING
436C Backhoe Loader Center Pivot, Single Tilt 9JN00001-00883 (MACHINE) POWERED BY 3054 Engine »
110-8632
AXLE GP-DRIVE & STEERING
436C Backhoe Loader Center Pivot, Parallel Lift 1RR00001-00997 (MACHINE) POWERED BY 3054 Engine »
110-8632
AXLE GP-DRIVE & STEERING
Caterpillar parts catalog:
Parts axle Caterpillar catalog:
1745206
AXLE GP-DRIVE & STEERING
416C, 426C, 436C
416C, 426C, 436C
1545471
AXLE GP-DRIVE & STEERING
416C, 416D, 420D, 426C, 430D, 436C
416C, 416D, 420D, 426C, 430D, 436C
1198191
AXLE & MTG GP-DRIVE & STEERING
426C, 436C, 438C, 438D, 442D
426C, 436C, 438C, 438D, 442D
1746317
AXLE GP-DRIVE & STEERING
416C, 426C, 428C, 436C, 438C
416C, 426C, 428C, 436C, 438C
1073716
AXLE & MTG GP-REAR
416C, 416D, 420D, 426C, 430D, 436C
416C, 416D, 420D, 426C, 430D, 436C
1545467
AXLE & MTG GP-DRIVE & STEERING
416C, 426C, 436C
416C, 426C, 436C
1111523
AXLE GP-DRIVE & STEERING
426C, 436C
426C, 436C
1745451
AXLE GP-DRIVE & STEERING
416C, 426C, 428C, 436C, 438C
416C, 426C, 428C, 436C, 438C
1122113
AXLE & MTG GP-DRIVE & STEERING
426C, 436C
426C, 436C
1245774
AXLE AS
416C, 426C, 428C, 436C
416C, 426C, 428C, 436C
3283726
AXLE AR-REAR
735B, 740B
735B, 740B
1399103
AXLE AR-OSCILLATING
966G, 966G II, 966H, 972G, 972G II, 972H
966G, 966G II, 966H, 972G, 972G II, 972H
1926487
AXLE AR-FIXED
816F, 816F II
816F, 816F II
2582857
AXLE GP
246C, 246D, 256C, 262C, 262C2, 262D, 272C, 272D, 272D XHP
246C, 246D, 256C, 262C, 262C2, 262D, 272C, 272D, 272D XHP
3399374
AXLE GP-FRONT
16H, 16H NA
16H, 16H NA
1392776
AXLE GP-REAR
35, 45, 55
35, 45, 55
1302277
AXLE GP-FRONT
TH103
TH103
1416892
AXLE GP-CENTER
735, 740
735, 740
4336116
AXLE AR-FRONT
120M 2, 12M 3, 140M 3, 160M 3
120M 2, 12M 3, 140M 3, 160M 3
2616275
AXLE GP
236, 236B, 236B3, 248, 252B, 252B3, 268B
236, 236B, 236B3, 248, 252B, 252B3, 268B