AXLE AR-OSCILLATING 1294281 - Caterpillar

Install hinge assemblies (22) to support assembly (24) .
Illustration 6 g03791222
(11) 8T-4140 Bolt (12) 8T-4193 Bolt (13) 9X-8257 Washer (23) 378-1667 Support As
Install support assembly (23) .
Illustration 7 g03791187
(1) 7K-1181 Cable Strap (20) 228-7506 Bracket (23) 378-1667 Support As (27) 132-5789 Clip (31) 5P-1076 Hard Washer (36) 8T-4136 Bolt (37) 8T-4137 Bolt
Install brackets (20) onto support assembly (23). Install clip (27) to secure existing wires.
Illustration 8 g03790643
(A) Plate (B) Tube (16) 117-1647 Spring (17) 193-0964 Handle As (18) 193-0965 Pin (30) 5H-3193 Spring Pin
Install the components as follows.
Place handle assembly (17) on plate (A) .
Install pin (18) up through plate (A) and handle assembly (17) .
Drop spring (16) down onto pin (18) from the top of tube (B) .
Install spring pin (30) into tube (B) above spring (16) .
Align the hole in pin (18) with the hole in handle (17). Install spring pin (30) .
Illustration 9 g03790598
(21) 246-8370 Grommet (25) 378-1673 Guard As (26) 392-0877 Rod (28) 3B-4630 Cotter Pin (33) 6V-8237 Washer
Install rod (26) and the other components as shown
Illustration 10 g03790499
(2) 115-4968 Bushing (3) 188-7270 Pin As (9) 7X-7729 Washer (10) 8T-4137 Bolt (25) 378-1673 Guard As
Install guard assembly (25) onto the two hinges of the support assembly as shown. Use proper lifting device as necessary to support components during installation.
Illustration 11 g03790534
(17) 193-0964 Handle As (18) 193-0965 Pin (25) 378-1673 Guard As (30) 5H-3193 Spring Pin
The left side will latch shut as shown.
Illustration 12 g03790237
(1) 7K-1181 Cable Strap (4) 261-3223 Communication Cable As (7) 104-6202 Clip (12) 8T-4193 Bolt (13) 9X-8257 Washer (25) 378-1673 Guard As (27) 132-5789 Clip (29) 4P-7581 Clip (32) 6D-4246 Clip (35) 8T-4121 Hard Washer (37) 8T-4137 Bolt
Route and secure communication cable assembly (4) to rear guard (5) .
Connect communication cable assembly (4) to the existing wiring.