AXLE AS 1341082 - Caterpillar

Removal Procedure
Start By:
Remove the fan. Refer to Disassembly and Assembly, "Fan - Remove and Install" for the correct procedure.
Illustration 1 g02014594
Typical example
Make a temporary mark on fan drive assembly (2) in order to identify the orientation and the position.
Remove bolts (1) from fan drive assembly (2).
Remove fan drive assembly (2). Installation Procedure
Illustration 2 g02014594
Typical example
Check the fan drive for wear and damage. If the fan drive is worn or damaged, replace the fan drive.
Install fan drive assembly (2). Note: Ensure that the fan drive is correctly oriented.
Install bolts (1) finger tight to fan drive assembly (2). Tighten the bolts to a torque of 44 N m (32 lb ft). End By:
Install the fan. Refer to Disassembly and Assembly, "Fan - Remove and Install" for the correct procedure.