AXLE GP-DRIVE & STEERING 1863462 - Caterpillar

Assembly Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     1P-0500     Driver Group     1    
B     5P-5197     Retaining Ring Pliers     1    
C     1P-0510     Driver Group     1    
1P-0774 Seal Installer     1    
Clean all parts and inspect all parts. If any parts are worn or damaged, use new Caterpillar parts for replacement.
Illustration 1 g00398958
Use Tool (A) and a hydraulic press to install shaft (11) and roller bearing (12) to roller assembly (5) .
Illustration 2 g00398810
Use Tool (B) to install retaining ring (10) to roller assembly (5) .
Illustration 3 g00398945
Use Tool (C) to install lip seal (9) to roller assembly (5) .
Illustration 4 g00398808
Install spacer (8) , key (7) and washer (6) to roller assembly (5) .
Illustration 5 g00398805
Install roller assembly (5) to roller bracket (3) . Install grease fitting (4) to roller assembly (5) .
Illustration 6 g00398802
Install nut (2) and lock washer (1) to roller bracket (3) . Bend lock washer (1) on nut (2) .
Fill roller assembly (5) with 5P-0960 Molybdenum Grease .