AXLE GP-FIXED 1V5949 - Caterpillar

1V5949 AXLE GP-FIXED Caterpillar parts 992C, 992D

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA1V5949
1V-5949
1V5949

Weight: 0.40 pounds 0 kg.

Buy AXLE GP-FIXED 1V5949 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL LOADER,

Compatible equipment models: 1V5949:

WHEEL LOADER 992C 992D Caterpillar

Number on catalog scheme:

Caterpillar 1V5949 Parts scheme AXLE GP-FIXED

For full view, you need register

Information:

Table 1
Effectivity for Incorrect Software
Model Arrangement Adaptability
324D L 286-0157 General Arrangement S/N:LAB261-414
264-8555 Engine Arrangement (TIER II, HIGH POWER) S/N:T2D229-333
325D L 286-0153 General Arrangement S/N:PAL251-465
264-8556 Engine Arrangement (TIER II, HIGH POWER) S/N:T2S254-386 Procedure to Check and Replace Machine Software (If Needed)
Check the Installed Machine and Engine Software
Turn the key start switch to the ON position.
Enter "Service Mode" in the monitor and enter "FFF2" password.
Select "ECM INFO" and press "OK".
Check and record "Soft Group Part Number" for the engine ECM and the machine ECM.
Compare the engine and machine software that is listed for your machine in Table 2.
If the part number for the engine or machine software for your machine is not listed in Table 2, your machine is correctly flashed and no update is required.
If both the engine and machine software are referenced in Table 2, then the current machine software for your machine is incorrect. Continue the procedure to flash correct software.
Table 2
Installed Software on Machine
Model Engine Software
(High Power) Current Machine Software (Standard Power)
324D L One of the Following 297-4533
or
309-5713
277-6961
283-2470
291-4778
295-1098
325D L One of the Following 297-4537
or
309-5719
277-6960
283-2467
291-4784
295-0755 Flash Correct Machine Software
Download the required software. The software is available in the form of flash files through the Caterpillar Service Information System (SIS). Refer to Table 3.
Table 3
Required Flash Software
Model Part Number Description Qty
324D L 309-5715 Machine Software Group 1
325D L 309-5721 Machine Software Group 1
Connect Caterpillar Electronic Technician (ET) to the machine.
Flash the new software to the machine ECM.After uploading the latest flash file to the machine ECM, no calibration or additional operation is required.