AXLE AR-OSCILLATING 2436032 - Caterpillar

Services Menu
Illustration 1 g02973236
Services menuAccess the Service Menu
Illustration 2 g01760113
Accessing the "Service" menuThe following screen will now be displayed.
Illustration 3 g01760116
The "Service" menuThe Service Menu contains the following categories.
Diagnostics
ECM SummaryCodes and events contained in the "Diagnostics" option may be viewed at any time. Logged codes cannot be cleared until the "Service" mode is enabled.From the "Service" menu, use the appropriate arrow button to highlight the desired menu option. Then, press the "OK" button in order to display that screen.Diagnostics (List)
Illustration 4 g01900013
The "Service Diagnostics"The "Diagnostics" menu option will show a complete list of all active events and the logged event codes and diagnostic codes.When the diagnostic message is acknowledged, a predetermined length of time passes before the message screen will appear on the monitoring system display again. This interval is dependent upon the severity of the warning level. Consult the appropriate warning category for the proper instruction.
Illustration 5 g01900023
Diagnostic message screen (1) ECM parameters (2) Fault code (3) "Occ" (occurrence) (4) "First" (5) "Last" (6) "Act" (active)Press the "OK" key while you are in the "Diagnostics" menu option in order to display the "Diagnostic Message" screen.Each line that is listed contains the following information about that event or that code.ECM parameters (1) - The "ECM" that contains the diagnostic codeFault Code (2) - Component Identifier or Failure Mode Identifier (CID/EID)Occ (Occurence) (3) - Number of occurrencesFirst (4) - Service hour of the first occurrenceLast (5) - Service hour of the last occurrenceAct (Active) (6) - "X" means that the event or the code is currently active.Logged codes and logged events that are Level III are cleared with password protection only.ECM Summary
Illustration 6 g01900095
The "ECM Summary" menuThe "ECM Summary" menu option allows the user to display a list of all the ECM. The summary also displays the associated part numbers for the ECM that are on the machine. Password Entry Screen
Some features of the machine menu are password protected. The password must be entered in order to program these features. The password feature is active until the end of the key cycle.