AXLE AR-OSCILLATING 2839110 - Caterpillar

2839110 AXLE AR-OSCILLATING Caterpillar parts R2900G

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA2839110
283-9110
2839110

Weight: 7782 pounds 3529 kg.

Buy AXLE AR-OSCILLATING 2839110 Caterpillar genuine, new aftermarket tractor parts with delivery
LOAD HAUL DUMP,

Compatible equipment models: 2839110:

LOAD HAUL DUMP R2900G Caterpillar

For full view, you need register

Information:

Illustration 2 g00746404
Install orifice (30) into control valve (6) .
Install plug (31) onto control valve (6) .
Illustration 3 g00746332
Install new O-ring seal (29) onto each plug (28) .
Illustration 4 g00746330
Install plugs (28) onto control valve (6) .
Illustration 5 g00746324
Install fittings (27) for the auxiliary hydraulic lines onto control valve (6) .
Install fittings (26) for the gerotor motor onto the control valve (6) .
Install fittings (25) for the swing circuit onto the control valve (6) .
Install fittings (24) onto control valve (6) .
Illustration 6 g00746322
Install new O-ring seal (23) onto cartridge (20) .
Install new O-ring seals (22) onto cartridge (20) .
Install new back up seals (21) onto cartridge (20) .
Illustration 7 g00746318
Install cartridge (20) onto control valve (6) .
Illustration 8 g00746313
Install new O-ring seal (19) onto each check valve (16) .
Install new O-ring seal (18) onto each check valve (16) .
Install new back up seal (17) onto each check valve (16) .
Illustration 9 g00746312
Install check valves (16) onto control valve (6). Tighten the check valve to a torque of 68 N m (50 lb ft).
Illustration 10 g00746269
Install new O-ring seals (15) onto cartridge (5) .
Install new back up seals (14) onto cartridge (5) .
Install new O-ring seal (13) onto cartridge (5) .
Illustration 11 g00746268
Install new O-ring seals (12) onto cartridge (4) .
Install new back up seals (11) onto cartridge (4) .
Install new O-ring seal (10) onto cartridge (4) .
Illustration 12 g00746266
Install new O-ring seals (9) onto cartridge (3) .
Install new back up seals (8) onto cartridge (3) .
Install new O-ring seal (7) onto cartridge (3) .
Illustration 13 g00746262
Install cartridge (5) for the swing circuit onto control valve (6). Tighten the cartridge to a torque of 27 N m (20 lb ft).
Install cartridge (4) onto control valve (6). Tighten the cartridge to a torque of 27 N m (20 lb ft).
Install cartridge (3) onto control valve (6). Tighten the cartridge to a torque of 27 N m (20 lb ft).
Illustration 14 g00746234
Install coil assemblies (2) .
Install nuts (1). Tighten the nuts to a torque of 12 2 N m (9 1.5 lb ft).