AXLE-WHEEL 2953295 - Caterpillar

Put 5P960 Grease on all pin bores for the lift and tilt cylinders and the bucket. Put lubricant on the lip of all seals. Use 8R2912 and 8R2913 Washers as required to maintain less than 2.0 mm (.08 in) total gap between tower and lift arm assemblies.(19) 5V6454 Washer thickness (new) ... 1.6 mm (.06 in.) 5V6455 Washer thickness (new) ... 3.0 mm (.12 in.)(20) Install washers (19) as needed between the lift arm and the bucket. Install a minimum of one washer (19) on each side of the lift arm. The final clearance (20) is to be less than ... 1.6 mm (.06 in.)