AXLE AR-OSCILLATING 3705241 - Caterpillar

Removal Procedure
Start By:
Remove the bottom guard. Refer to Disassembly and Assembly, "Bottom Guard - Remove and Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-1114 Vacuum Cap 1
Illustration 1 g01367452
Install Tooling (A) onto the hydraulic tank . Attach an air supply hose onto Tooling (A). Apply 276 to 414 kPa (40 to 60 psi) of air. This procedure will pull a vacuum on the hydraulic system.
Illustration 2 g01367545
Disconnect harness assembly (1). Remove bolt (3) and the flange. Remove solenoid valve (2). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A FT-1114 Vacuum Cap 1
Illustration 3 g01367452
Illustration 4 g01367545
Install Tooling (A) onto the hydraulic tank . Attach an air supply hose onto Tooling (A). Apply 276 to 414 kPa (40 to 60 psi) of air. This procedure will pull a vacuum on the hydraulic system.
Position solenoid valve (2). Install the flange and bolt (3). Tighten bolt (3) to a torque of 14 7 N m (10 5 lb ft).
Illustration 5 g01367452
Remove Tooling (A). End By:
Install the bottom guard. Refer to Disassembly and Assembly, "Bottom Guard - Remove and Install".