AXLE ASSEM. 4D9925 - Caterpillar

Illustration 1 g03388104
Table 1
Specification for 421-5655 Front Suspension Gp
Item Qty Part Specification Description
1 2 295-5706 Front Suspension Gp Before assembly to axle, lubricate the taper of strut rod with black 4C-5592 Anti-Seize Compound.
2 2 3E-3370 Connector Receptacle As Use as required on strut pressure sensors for protection during shipment and field assembly.
3 6 8T-8737 Seal Plug Use as required on strut pressure sensors for protection during shipment and field assembly.
4 4 238-9928 Valve As Tighten the main valve body to 13.6 0.5 N m (120.4 4.4 lb in).
Tighten the valve swivel nut closure to 6.8 0.5 N m (60.2 4.4 lb in) and tighten the valve cap to 2.3 0.5 N m (20.4 4.4 lb in) after charging.
5 2 221-3417 Pressure Sensor Gp Torque to 45.0 1.0 N m (33.2 0.7 lb ft). 295-5706 Front Suspension Gp
Illustration 2 g03388105
Table 2
Specification for 295-5706 Front Suspension Gp
Item Qty Part Specification Description
6 - - Before assembly, apply green Loctite 609 to wiper groove.
D 1 6E-0731 Piston Outside diameter is 408.56 0.13 mm (16.085 0.005 inch).
7 1 3B-8489 Grease Fitting After assembly, apply 1P-0808 Multipurpose Grease to the grease fitting.
8 - - Before assembly, apply 9X-2037 Additive to the head.
E 1 271-7488 Rod Diameter is 342.825 0.050 mm (13.4970 0.0020 inch).
9 1 6H-1717 Bolt Apply sealant and hand torque. The amount of torque should not cause the end to turn.