AXLE AS-FRONT 8W6472 - Caterpillar

8W6472 AXLE AS-FRONT Caterpillar parts 12G, 130G, 140G, 160G

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA8W6472
8W-6472
8W6472

Weight: 440 pounds 199 kg.

Buy AXLE AS-FRONT 8W6472 Caterpillar genuine, new aftermarket tractor parts with delivery
MOTOR GRADER,

Compatible equipment models: 8W6472:

MOTOR GRADER 12G 130G 140G 160G Caterpillar

Number on catalog scheme: 5

Caterpillar 8W6472 Parts scheme AXLE AS-FRONT

For full view, you need register

Information:

Illustration 2 g03587298
Use a suitable press to install shaft (48) into arm assembly.
Use a suitable hammer and punch to install dowels (49). Note: Align the notches in the shaft with the dowel holes in arm assembly during installation.
Illustration 3 g03587297
Lubricate O-ring seal (46) with lubricant being sealed. Install O-ring seal (46) and spacer (45).
Illustration 4 g03586345
Lubricate the sealing lip of lip seal (44) with lubricant being sealed
Install spacer (41), ball bearing (40), ball bearing (43), and lip seal (44) into pulley (42).
Illustration 5 g03586347
Fill cavity (53) with Tooling (B).
Illustration 6 g03586349
Install pulley assembly (39), washer (38), and bolts (37). Install gasket (36), cover (35), and bolts (34).
Illustration 7 g03586837
Install arm assembly (33), plate (32), and bolt (31).
Illustration 8 g03586847
Install plates (24) and (26). Install spacers (27) and (28).
Install pins (23) and (25). Install cotter pins (29) and (30).
Illustration 9 g03586857
Install retainers (21), pins (20), and cotter pins (22) onto spring assembly (17).
Illustration 10 g03586859
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Install spring assembly (17). Install washers (19) and (16). Install nuts (18) and (15).
Illustration 11 g03586860
Lubricate O-ring seal (14) with lubricant that is being sealed. Install O-ring seal (14) and spacer (13).
Illustration 12 g03586862
Pack ball bearing (8) and ball bearing (11) with Tooling (B). Install spacer (9), ball bearing (8), ball bearing (11), and lip seal (12).
Illustration 13 g03586885
Apply Tooling (A) to threads of bolt (5). Install hub assembly (7), washer (6) and bolt (5).
Illustration 14 g03586886
Attach a suitable lifting device to pulley. The weight of pulley is approximately 21 kg (46 lb). Apply Tooling (A) to threads of bolts (3). Install pulley (4) and bolts (3).
Illustration 15 g03586888
Apply Tooling (A) to the threads of bolts (2). Install the O-ring seal, adapter (1), and bolts (2). End By:
Install fan drive.