AXLE AS 9R6556 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     132-8223     Hydraulic Pump and Motor Gp     1    
1U-6221 Hydraulic Torque Wrench Gp     1    
132-8143 Wrench Link     1    
B     138-7573     Link Bracket     2    
D     5P-3931     Anti-Seize Compound     1    
E     1U-8846     Gasket Sealant     1    
F     9S-3263     Thread Lock Compound     1    
Apply Tooling (D) on the locating pin in the main frame. Also, apply Tooling (D) in the pin bore in the main frame.
Apply Tooling (E) on the mating surface of the main frame and the swing drive housing.
Illustration 1 g00900976
Illustration 2 g00518158
Attach Tooling (B) and a suitable lifting device to swing drive (2). The weight of swing drive (2) is approximately 310 kg (683 lb). Use Tooling (B) and the suitable lifting device to position swing drive (2) on the machine.
Apply Tooling (F) on the threads of bolts (1). Install bolts (1). Tighten bolts (1) with Tooling (A) .
Fill swing drive (2) with oil. Refer to Operation and Maintenance Manual, "Swing Drive Oil - Check".End By: Install the swing motor. Refer to Disassembly and Assembly, "Swing Motor - Install".