3401733 BACKHOE AR-EXTENDABLE STICK Caterpillar parts
422F, 428F, 434F
Rating:
Alternative (cross code) number:
CA3401733
340-1733
3401733
CA3401733
340-1733
3401733
BACKHOE LOADER,
Compare Prices:
As an associate, we earn commssions on qualifying purchases through the links below
Sunsong 3401733 Power Steering Pressure Line Hose Assembly
Sunsong Pressure Hoses exceed original equipment performance standards (SAE J2050) with a Max working pressure of 1, 500 psi a burst pressure rating of 8, 700 psi and a tensile strength of 1, 600 lb. This provides exceptional durability and long life || All tubing is manufactured from high grade Steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime || Each Hose is precision engineered to exact fit and Includes brackets, grommets, switch ports, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition || Every hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new Hose || Hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. Hoses have an operating temperature range of -40 to 310 degrees Fahrenheit, exceeding original equipment requirements
Sunsong Pressure Hoses exceed original equipment performance standards (SAE J2050) with a Max working pressure of 1, 500 psi a burst pressure rating of 8, 700 psi and a tensile strength of 1, 600 lb. This provides exceptional durability and long life || All tubing is manufactured from high grade Steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime || Each Hose is precision engineered to exact fit and Includes brackets, grommets, switch ports, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition || Every hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new Hose || Hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. Hoses have an operating temperature range of -40 to 310 degrees Fahrenheit, exceeding original equipment requirements
Sunsong 3401733 Power Steering Pressure Line Hose Assembly
Sunsong Pressure Hoses exceed original equipment performance standards (SAE J2050) with a Max working pressure of 1, 500 psi a burst pressure rating of 8, 700 psi and a tensile strength of 1, 600 lb. This provides exceptional durability and long life || All tubing is manufactured from high grade Steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime || Each Hose is precision engineered to exact fit and Includes brackets, grommets, switch ports, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition || Every hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new Hose || Hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. Hoses have an operating temperature range of -40 to 310 degrees Fahrenheit, exceeding original equipment requirements
Sunsong Pressure Hoses exceed original equipment performance standards (SAE J2050) with a Max working pressure of 1, 500 psi a burst pressure rating of 8, 700 psi and a tensile strength of 1, 600 lb. This provides exceptional durability and long life || All tubing is manufactured from high grade Steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime || Each Hose is precision engineered to exact fit and Includes brackets, grommets, switch ports, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition || Every hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new Hose || Hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. Hoses have an operating temperature range of -40 to 310 degrees Fahrenheit, exceeding original equipment requirements
Sunsong 3401733 Power Steering Pressure Line Hose Assembly
Sunsong Pressure Hoses exceed original equipment performance standards (SAE J2050) with a Max working pressure of 1, 500 psi a burst pressure rating of 8, 700 psi and a tensile strength of 1, 600 lb. This provides exceptional durability and long life || All tubing is manufactured from high grade Steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime || Each Hose is precision engineered to exact fit and Includes brackets, grommets, switch ports, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition || Every hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new Hose || Hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. Hoses have an operating temperature range of -40 to 310 degrees Fahrenheit, exceeding original equipment requirements
Sunsong Pressure Hoses exceed original equipment performance standards (SAE J2050) with a Max working pressure of 1, 500 psi a burst pressure rating of 8, 700 psi and a tensile strength of 1, 600 lb. This provides exceptional durability and long life || All tubing is manufactured from high grade Steel and electroplated with a zinc coating (chromium III), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime || Each Hose is precision engineered to exact fit and Includes brackets, grommets, switch ports, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition || Every hose is subjected to a high pressure quality assurance test before leaving the factory, ensuring trouble free installation and operation of your new Hose || Hoses are made from multi-layer reinforced rubber and have a synthetic rubber coating that is highly resistant to oil, ozone, and heat. Hoses have an operating temperature range of -40 to 310 degrees Fahrenheit, exceeding original equipment requirements
For full view, you need register
Caterpillar SIS machinery equipment:
Caterpillar SIS
428F Backhoe Loader SJW00001-UP (MACHINE) POWERED BY C4.4 Engine »
340-1733
BACKHOE AR-EXTENDABLE STICK
422F Backhoe Loader LRH00001-UP (MACHINE) POWERED BY C4.4 Engine »
340-1733
BACKHOE AR-EXTENDABLE STICK
434F Backhoe Loader LDH00001-UP (MACHINE) POWERED BY C4.4 Engine »
340-1733
BACKHOE AR-EXTENDABLE STICK
434F Backhoe Loader MTR00001-UP (MACHINE) POWERED BY C4.4 Engine »
340-1733
BACKHOE AR-EXTENDABLE STICK
428F Backhoe Loader Side Shift RAK00001-UP (MACHINE) POWERED BY C4.4 Engine »
340-1733
BACKHOE AR-EXTENDABLE STICK
428F Backhoe Loader LBH00001-UP (MACHINE) POWERED BY C4.4 Engine »
340-1733
BACKHOE AR-EXTENDABLE STICK
434F Backhoe Loader FLY00001-UP (MACHINE) POWERED BY C4.4 Engine »
340-1733
BACKHOE AR-EXTENDABLE STICK
Caterpillar parts catalog:
Information:
Remove bolts (6) and door assembly (7). Remove bolts (8) and front door (9).
Illustration 5 g02587904
Illustration 6 g02587909
Disconnect harness assembly (10) and harness assembly (12) from electronic control group (11).
Remove bolts (13), the mounts, the spacers, and electronic control group (11).
Disconnect the harness assembly for fluid level sensor assembly (14). Remove the machine screws and fluid level sensor assembly (14) from the tank assembly.
Disconnect hose (15) from the vent. Remove the vent from the tank assembly.
Disconnect harness assembly (16) from temperature sensor (17). Remove temperature sensor (17).
Remove nuts (19) and disconnect the harness assemblies from switch assembly (18). Remove nuts (20) and disconnect the harness assemblies from switch assembly (18). Remove the bolts and switch assembly (18).
Illustration 7 g02587920
Remove locking screws (22). Remove ball valve (21) and the adapter assemblies from the tank assembly.
Illustration 8 g02587923
Attach a suitable lifting device to cabinet assembly (23). The weight of cabinet assembly (23) and the tank assembly is approximately 30 kg (66 lb). Remove bolts (24). Remove cabinet assembly (23) and the tank assembly from the shell.
Illustration 9 g02587925
If necessary, remove rubber sheet (29) and insulation (28). Disconnect the harness assembly from heater (27). Remove heater (27). Disconnect the harness assembly from temperature sensor assembly (26). Remove temperature sensor assembly (26) from tank assembly (25).
Illustration 10 g02587938
Remove bolts (30). Lift cabinet assembly (23) from tank assembly (25). Ensure that no harness assemblies interfere during removal.
Illustration 11 g02587939
Remove bolts (31) and flange assembly (32). Remove the O-ring seals.
Illustration 12 g02587952
Disconnect harness assembly (33) and harness assembly (34) from the pressure sensors. Disconnect harness assembly (35), harness assembly (36), and harness assembly (39) from the solenoid valve groups. Disconnect harness assembly (37) from the temperature sensor. Disconnect harness assembly (38) from the heater group.
Illustration 13 g02588039
Remove wing nuts (40) and bar (41) from diesel exhaust fluid pump group (42). Remove bolts (44). Remove diesel exhaust fluid pump group (42) and manifold group (43) as an assembly.
Illustration 14 g02588042
Remove bolts (45). Disconnect diesel exhaust fluid pump group (42) from manifold group (43).
Illustration 15 g02588059
Remove solenoid valve group (46), solenoid valve group (47), and the O-ring seals from manifold group (43). Remove air valve group (50) and the O-ring seals from manifold group (43).
Remove temperature sensor group (48) and the O-ring seal from manifold group (43). Remove air regulator (49) from manifold group (43).
Remove plug (51), spring (52), piston (53), and the O-ring seals from manifold group (43).
Illustration 16 g02588076
Remove pressure sensor group (54), pressure sensor group (57), and the O-ring seals from manifold group (43).
Remove solenoid valve group (56) and the insert from manifold group (43).
Remove heater group (55) from manifold group (43).
Disconnect the tube assembly and remove air valve group (60) from manifold group (43).
If necessary, remove air brake connectors (58) from manifold group (43).
If necessary, remove breather valves (59) from manifold group (43).
Parts backhoe Caterpillar catalog:
422F, 428F, 434F
422F, 428F, 434F
438B
1191315
BACKHOE AR-EXTENDABLE STICK
428B, 438B
428B, 438B
1545374
BACKHOE AR-EXTENDABLE STICK
428C, 438C
428C, 438C