BACKUP WARNING GROUP 9D8830 - Caterpillar

Use caution to avoid possible personal injury when adjusting the attachment lift kickout.Keep personnel off the machine. Clear the area when working under or around the attachment linkage.With the attachment raised, proper support must be provided for the attachment and/or the linkage.
Start the engine. Raise the bucket or the attachment to the desired lift kickout height and stop the engine.
Illustration 1 g00297678
950G and 962G
Illustration 2 g00495490
IT62G and 962G Parallel Lift Machines
Loosen nuts (4). Adjust control group (1) so that the lower edge of magnet (3) is even with the center of control group (1) .
Tighten nuts (4) .
Loosen bolts (2). Adjust control group (1) so that the face is 8 2 mm (0.32 0.08 inch) away from magnet (3) .
Tighten bolts (2) .
To check the adjustment, start the engine. Move the lift control lever to the RAISE detent position.When the bucket or the attachment reaches the preset lift height, the lift control lever should return to the HOLD position.
If the kickout position is not correct, perform Steps 1 through 6 again.