BAFFLE AS 2199912 - Caterpillar

Illustration 1 g02729937
Table 1
Specification for 353-0611 Final Drive Gp
Item Qty Part Specification Description
1 16 453-4137 Bolt Before assembly, the contact surfaces of the bolts, the washers, and the tightened parts must be clean and free from protective coating and oil.
Torque to 530 70 N m (391 52 lb ft).
2 2 095-1270 Socket Setscrew Before assembly, apply blue Loctite 242 to the threads. During assembly flush the setscrew with the surface of the cover assembly.
3 2 3E-2338 Pipe Plug Torque to 80 10 N m (59 7 lb ft).
4 - - Before assembly, apply Loctite high flex GM to the mating surfaces of the ring gear group.
5 6 114-1539 Dowel Pin Apply Loctite C5A Copper Anti-Seize to the inside diameter and outside diameter of the mating parts
6 1 296-6220 Ball Bearing Before assembly, apply Loctite C5A Copper Anti-Seize to the inside diameter and outside diameter of the mating parts.
7 1 174-4874 Duo-Cone Seal Gp Rubber toric seals and all surfaces that in contact with the seals must be clean and dry at assembly. Prior to assembly apply, a thin layer of 6V-4876 Lubricant to the surfaces that are in contact with the metal seals. The metal seal must be assembled square with the bore. The rubber toric seals must not bulge. The rubber toric seals must not be twisted.
8 - - After installation of the spring pins (8), create two stake marks for each pin slightly near the hole of spring pins. Refer to Illustration 1 for the locations of the stake marks.
D - - The distance from the edge of the spring pin hole to the stake mark is 1.5 mm (0.060 inch).
9 As required, use the following shims to achieve the correct clearance between the ball bearing and the coupling gear. If two shims (9) are required, install the thinnest shim next to the coupling gear:
1 096-1773 Shim Thickness is 0.15 mm (0.006 inch).
1 096-1774 Shim Thickness is 0.30 mm (0.012 inch).
1 096-1775 Shim Thickness is 0.40 mm (0.016 inch).
1 096-1776 Shim Thickness is 0.50 mm (0.020 inch).
1 096-1777 Shim Thickness is 0.60 mm (0.024 inch).
1 096-1778 Shim Thickness is 0.70 mm (0.028 inch).
1 096-1779 Shim Thickness is 0.80 mm (0.031 inch).
1 096-1780 Shim Thickness is 1.00 mm (0.039 inch).
1 096-1781 Shim Thickness is 1.60 mm (0.063 inch).
10 14 227-6034 Bolt Before assembly, the contact surfaces of the bolts, the washers, and the tightened parts must be clean and free from protective coating and oil.
Before assembly, apply blue Loctite 242 to the threads.
Torque to 270 40 N m (199 30 lb ft).