BAFFLE AS 2400107 - Caterpillar

Table 1
Sales Model     Serial Number and Prefix    
246C     S/N:JAY1-3023    
256C     S/N:DWS1-1371    
262C     S/N:MST1-2538    
272C     S/N:RED1-1654    
277C     S/N:JWF1-1990    
279C     S/N:MBT1-286    
287C     S/N:MAS1-1725    
289C     S/N:JMP1-269    
297C     S/N:GCP1-1481    
299C     S/N:JSP1-259    The machines that are listed in Table 2 have the updated plate.
Table 2
Sales Model     Serial Number and Prefix    
246C     S/N:JAY3024-UP    
256C     S/N:DWS1372-UP    
262C     S/N:MST2539-UP    
272C     S/N:RED1655-UP    
277C     S/N:JWF1991-UP    
279C     S/N:MBT287-UP    
287C     S/N:MAS1726-UP    
289C     S/N:JMP270-UP    
297C     S/N:GCP1482-UP    
299C     S/N:JSP260-UP    Use the following procedure in order to update your 258-4371 Bracket As .Note: If your machine has the updated 258-4371 Bracket As make sure that the 258-4371 Bracket As is pushed all the way toward the front of the machine. Ensure that there are no gaps in the door seal.
Illustration 1 g01949298
(1) 258-4371 Bracket As
Remove 258-4371 Bracket As (1) from the machine.
Illustration 2 g01949312
(A) 23.80 mm (0.937 inch) (B) 30.30 mm (1.193 inch)
Machine a slot that is 16 mm (0.630 inch) by 19 mm (0.748 inch) into 258-4371 Bracket As (1). Machine the slot at the location that is shown in Illustration 2. Machine the slot 3 mm (0.118 inch) toward the front. Make sure to reference from the bottom of the bracket in order to create the slot.
Illustration 3 g01949331
Place 258-4371 Bracket As (1) onto the machine. Push 258-4371 Bracket As (1) toward the front of the machine before tightening 258-4371 Bracket As (1) .Note: Ensure that there are no gaps in the door seal.