BAFFLE GP 3534308 - Caterpillar

Illustration 1 g03418563
Table 1
Specification for 370-3825 Track Roller Gp
Item Qty Part Specification Description
1 2 171-5883 Duo-Cone Seal Gp The rubber toric seals and all the contacting surfaces must be clean and dry at assembly. Just before assembly, apply a thin layer of 6V-4876 Lubricant to the contacting surfaces of the metal seal rings. The seal rings must be assembled square. The rubber toric seal should not bulge and the rubber toric seal should not twist.
2 2 1H-8128 O-Ring Seal During assembly, lubricate two O-ring seals (2) and the mating surface of the bushing (3) with the lubricant that is being sealed.
3 2 124-8248 Bushing
4 2 217-6359 Collar Lubricate the shaft (5) in the seating surface of the collar (4) with the lubricant that is being sealed.
5 1 217-6358 Shaft
6 1 - The plug must not be recessed below the surface of the 6Y-0454 Stopper As.
- - - Minimum end play of the shaft in axial direction is 0.25 mm (0.010 inch).
Maximum end play of the shaft in axial direction is 1.23 mm (0.048 inch).