BAFFLE 3967337 - Caterpillar

Raising the Cab
In order to permit easy access to the mechanical components and the hydraulic components, the cab can be tilted forward.The hydraulic pump is operated manually. The hydraulic pump is used in order to raise the cab. The hydraulic pump is used in order to lower the cab.
Illustration 1 g00348602
Remove bolts (1) and remove cover plate (2). The cover plates and the bolts are located on both sides of the cab. The cover plates and the bolts are located behind the seat.
Illustration 2 g00348603
Remove bolt (3) on each side of the machine. Remove nut (4) on each side of the machine.
Illustration 3 g00348604
Remove bolts (7) and remove spacers (8) .
Remove bolts (9) and (10) .
Install bolts (7) and spacers (8) into hole (6). Install spacers (8) between the cab and the frame pivot.
Illustration 4 g00348605
Remove cover (11) from the hydraulic pump. The pump is located on the right side of the machine.
Illustration 5 g00348606
Remove pump handle (12) from the storage location inside the cab.
Illustration 6 g00348607
Move valve (13) to the top position.
Insert pump handle (12) into the pump. Move the handle upward and move the handle downward in order to raise the cab.
Continue to raise the cab. After the cab is raised, install bolts (10) into the original bolt holes when bolt holes (6) are in alignment.
Move valve (13) to the horizontal (neutral) position. The horizontal (neutral) position will prevent the buildup of pressure in the hydraulic system.Lowering the Cab
Use the photographs and callouts in Operation and Maintenance Manual, "Cab Tilting"for reference.
Illustration 7 g00348604
Remove bolts (10) .
Illustration 8 g00348607
Move valve (13) to the bottom position.
Illustration 9 g00348606
In order to lower the cab, use pump handle (12) .
After the cab is lowered, install bolts (9) and (10) .
Remove bolts (7) and spacers (8) from hole (5) .
Install bolts (9) and spacers (6) .
Illustration 10 g00348603
Install bolts (3) and nuts (4) that are located inside the cab. The bolts and nuts are located behind the seat.
Illustration 11 g00348602
Install cover plate (2) and bolts (1) that are located on each side of the cab. The cover plate and the bolts are located behind the seat.
Illustration 12 g00348605
Install cover (11) on the hydraulic pump.