BAFFLE 4745413 - Caterpillar

Illustration 23 g01457899
The background of the control panel can be changed.
Right click on an empty space within the control panel or select "Edit".
Click "Set Background Image".The background can be set to a color.
Open the "Paint" software.
Create a screen with the desired color.
Save the screen first, then open the screen as the background image.The controls and the text can be set to "transparent".
Right click on the desired item.
Select "Display Transparent". Refer to Illustration 24.
Illustration 24 g01457900
Control Panel Tabs
Tabs can be configured for used on the control panel.Perform the following two steps in order to rename an existing tab.
Select "Edit".
Select "Rename Selected Tab".Perform the following two steps in order to add another tab.
Select "Edit".
Select "Add Tab".Note: In order to edit the new tab, click the desired tab. A new sheet will open.Refer to Illustration 25.
Illustration 25 g01457903
If a control must be moved or sized, after the parameter has been set, move the control to the desired location. Then "RESET" the parameter again. This process will reset the standard position for the control and will prevent the control from moving. Be sure to reset the parameter for any control that has been moved.Note: When multiple tabs are used, the parameters for each control must be reset after the control has been moved or has change in size. If the parameters are not reset, the control may revert to the original configuration.Logging Data to a File
The "EMCP 3 Monitoring Software" can view data that is in a text format and can log the data to a file.
In order to access the data that is to be logged, navigate to the "Data Log Configuration" dialog.
Click "Edit".
Click "Data Log Configuration".
Select the desired parameter that is to have the data logged or double click the desired parameter.
After the "Data Log Configuration" dialog has appeared, click the desired parameter that is shown on the "Parameter List".
Click the "Add" button.
The parameter will appear under the "Parameter" tab information.Note: If the desired parameter is double clicked, then the parameter will appear under the "Parameter" tab information without the use of the "Add" button.Multiple parameters can be chosen if desired. Refer to Illustration 26.
Illustration 26 g01457914
The parameters can be viewed in the block type group, control group, engine group, generator group, I/O group, and the status group. Perform the following steps in order to select a certain group type.
Click on one of the choices that is shown in the "Device/Group" field.
The "Parameter List" will change in order to show only the parameters that are related to the group that is selected.
Select the desired parameters that are to have the parameter data logged. Click "OK" in order to close the configuration screen.
Click "OK" in order to confirm the changes that have been made in the "Data Log Configuration" dialog.
Perform the following steps in order to view the data that has been selected.
Click "View" that is on the tool bar.
Click "Data Log Data". A dialog will appear that looks like Illustration 27.Note: If the data value says that the control is "Off Line", be sure