BAFFLE 5088506 - Caterpillar

Removal Procedure
Illustration 1 g03358883
Disconnect harness assembly (2) for temperature sensor (1) from harness assembly (3).
Remove temperature sensor (1) from Aftertreatment Regeneration Device (ARD) (4). Note: Make temporary mark on the temperature sensor to show correct orientation.Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A - Bostik Pure Nickel
Anti-Seize Compound 1
Ensure that all components are clean and free from wear and damage. If necessary, replace any components that are worn or damaged.
Illustration 2 g03358883
Lightly lubricate the thread of temperature sensor (1) with Tooling (A). Install temperature sensor (1) to Aftertreatment Regeneration Device (ARD) (4).
Torque temperature sensors (1) to a torque of 30 N m (266 lb in).
Connect harness assembly (2) for temperature sensor (1) to harness assembly (3).