BAFFLE ASSEM. (Left Hand) 7S6384 - Caterpillar

Removal Procedure
Start By:
Remove the precooler.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for the correct draining and filling procedures.
Illustration 1 g02115322
Remove tube assembly (1) .
Illustration 2 g02115513
Remove bolts (3) and harness assembly (2) .
Remove water temperature regulator housing (4) .
Illustration 3 g02115534
Remove elbow (5) .
Remove bolts (9) and manifold (7) from housing (6) .
Remove temperature sensor (8) .
Illustration 4 g02117173
Remove water temperature regulators (10) from housing (7) .
Remove tube (11) and the O-ring seals.Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Install water temperature regulator housing (4) in the reverse order of removal.