BAFFLE 7T0062 - Caterpillar

Assembly Procedure
Note: Make sure that all of the parts of the selector valve are thoroughly clean. Also, check the condition of all the parts. If any of the parts are worn or damaged, use new parts for replacement.
Apply clean hydraulic oil on all of the internal parts of the selector valve.
Illustration 1 g00543133
Illustration 2 g00543130
Install O-ring seal (13) on plug (12) .
Install plug (12) on the valve body.
Illustration 3 g00543126
Illustration 4 g00543123
Install O-ring seal (11) on the valve body.
Place cover plate (10) in position on the valve body. Install bolts (9) that secure the cover plate to the valve body.
Illustration 5 g00543100
Install spool (7) and spring (8) in the valve body. Install O-ring seal (6) on cover (5) .
Illustration 6 g00543099
Place cover (5) in position on the valve body. Install bolts (4) that secure the cover to the valve body.
Illustration 7 g00543094
Install O-ring seals (3) on solenoid valve (2) .
Illustration 8 g00543093
Place solenoid valve (2) in position on the valve body. Install two bolts (1) that secure the solenoid valve to the valve body.End By: Install the selector valve. Refer to Disassembly and Assembly, "Selector Valve (Hydraulic Lockout) - Install".