1688453 BALL BEARING Caterpillar parts
330B, 330B L, OEMS
Rating:
Alternative (cross code) number:
CA1688453
168-8453
1688453
CA1688453
168-8453
1688453
Weight: 18 pounds 8 kg.
EXCAVATOR, UNDERCARRIAGE,
Related part:
1688453
BEARING-BALL-YM
4174497
CL
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
1688453 Bearing-SP (New AFTERMARKET) - G&T Engine Parts
G&T Engine Parts Fits equipment: ENGINE - MACHINE: 3306; EXCAVATOR: 330B L, 330B LN; OEM SOLUTIONS: OEMS. ENGINE - MACHINE: 3306; EXCAVATOR: 330B L; 330B LN; OEM SOLUTIONS: OEMS. || Condition: NEW AFTERMARKET || Weight: 21.45 lbs || Dimensions: 10-16.89-16.89 in || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
G&T Engine Parts Fits equipment: ENGINE - MACHINE: 3306; EXCAVATOR: 330B L, 330B LN; OEM SOLUTIONS: OEMS. ENGINE - MACHINE: 3306; EXCAVATOR: 330B L; 330B LN; OEM SOLUTIONS: OEMS. || Condition: NEW AFTERMARKET || Weight: 21.45 lbs || Dimensions: 10-16.89-16.89 in || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
CTP 1688453 Special Ball Bearing
CTP Bearing Only || Sold in each || Easy in-and-out fit
CTP Bearing Only || Sold in each || Easy in-and-out fit
Number on catalog scheme:
3
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 364-9107 Timing Pin (Fuel Injection Pump) 1
B 230-6284 Timing Pin (Camshaft) 1
C 136-4632 Timing Pin (Crankshaft) 1
D 298-5564 T40 Torx Socket 1 Start By:
Remove the front cover. Refer to Disassembly and Assembly, "Front Cover - Remove and Install" for the correct procedure.
Remove the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install" for the correct procedure. Note: Care must be taken in order to ensure that the fuel injection pump timing is not lost during the removal of the idler gear. Carefully follow the procedure in order to remove the fuel pump gear.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shorten component life.
Illustration 1 g01994555
Illustration 2 g01994553
Rotate the crankshaft so that number one piston is at top dead center on the compression stroke. Refer to System Operation, Testing and Adjusting, "Finding Top Center Position for No.1 Piston" for the correct procedure.
Remove plug (2) from the cylinder block and remove O-ring seal (1) from the plug.
Ensure that Tooling (C) is installed in Hole (Y) in the cylinder block. Use Tooling (C) in order to lock the crankshaft in the correct position.
Ensure that Tooling (B) is installed into Hole (X) in camshaft gear (3). Use Tooling (B) in order to lock the camshaft in the correct position. Note: Ensure that the gears are marked in order to show alignment. Refer to Illustration 2.
Use Tooling (A) in order to lock the fuel injection pump gear in the correct position. Refer to Disassembly and Assembly, "Fuel Injection Pump - Remove" for the correct procedure.
Illustration 3 g01994556
Use Tooling (D) in order to loosen threaded inserts (5) on all rocker arms (6). Unscrew threaded inserts (5) on all rocker arms (6) until all valves are fully closed. Note: Failure to ensure that ALL threaded inserts are fully unscrewed can result in contact between the valves and pistons.
Illustration 4 g01994576
Illustration 5 g01994557
Mark plate (8) in order to show orientation. Note: Identification will ensure that the plate can be installed in the original orientation.
Remove bolts (7).
Remove plate (8).
Remove the assembly of idler gear (4).
Remove hub (9) from the recess in the front housing.
Table 1
Required Tools
Tool Part Number Part Description Qty
A 364-9107 Timing Pin (Fuel Injection Pump) 1
B 230-6284 Timing Pin (Camshaft) 1
C 136-4632 Timing Pin (Crankshaft) 1
D 298-5564 T40 Torx Socket 1 Start By:
Remove the front cover. Refer to Disassembly and Assembly, "Front Cover - Remove and Install" for the correct procedure.
Remove the valve mechanism cover. Refer to Disassembly and Assembly, "Valve Mechanism Cover - Remove and Install" for the correct procedure. Note: Care must be taken in order to ensure that the fuel injection pump timing is not lost during the removal of the idler gear. Carefully follow the procedure in order to remove the fuel pump gear.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shorten component life.
Illustration 1 g01994555
Illustration 2 g01994553
Rotate the crankshaft so that number one piston is at top dead center on the compression stroke. Refer to System Operation, Testing and Adjusting, "Finding Top Center Position for No.1 Piston" for the correct procedure.
Remove plug (2) from the cylinder block and remove O-ring seal (1) from the plug.
Ensure that Tooling (C) is installed in Hole (Y) in the cylinder block. Use Tooling (C) in order to lock the crankshaft in the correct position.
Ensure that Tooling (B) is installed into Hole (X) in camshaft gear (3). Use Tooling (B) in order to lock the camshaft in the correct position. Note: Ensure that the gears are marked in order to show alignment. Refer to Illustration 2.
Use Tooling (A) in order to lock the fuel injection pump gear in the correct position. Refer to Disassembly and Assembly, "Fuel Injection Pump - Remove" for the correct procedure.
Illustration 3 g01994556
Use Tooling (D) in order to loosen threaded inserts (5) on all rocker arms (6). Unscrew threaded inserts (5) on all rocker arms (6) until all valves are fully closed. Note: Failure to ensure that ALL threaded inserts are fully unscrewed can result in contact between the valves and pistons.
Illustration 4 g01994576
Illustration 5 g01994557
Mark plate (8) in order to show orientation. Note: Identification will ensure that the plate can be installed in the original orientation.
Remove bolts (7).
Remove plate (8).
Remove the assembly of idler gear (4).
Remove hub (9) from the recess in the front housing.
Caterpillar parts catalog:
Parts ball Caterpillar catalog:
120B, 120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12E, 12F, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 140, 140B, 140G, 140H, 140H ES, 140H NA, 140...
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140B, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 16, 160G, 160H, 160H ES, 160H NA, 163H NA, 1673C, 215, 215C, 235, 235B, 235C, 235D, 245, 3054, 3054B, 3054C...
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 16G, 16H NA, 215, 225, 229, 235, 235B, 245, 3204, 330, 330 FM L, 330 L, 33...
120B, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 140M 3,...
1140, 1150, 1160, 120B, 12E, 140B, 16, 215, 215B, 215D, 219D, 225, 227, 235, 235B, 235C, 245, 245B, 24H, 24M, 30/30, 307B, 307C, 308E CR, 308E SR, 3114, 311C, 311D LRR, 311F LRR, 312C, 312C L, 312D, 3...
120G, 12G, 130G, 140G, 14G, 153, 160G, 163, 16G, 183B, 2384C, 2484C, 30/30, 311, 311B, 311D LRR, 311F LRR, 312, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D, ...
1090, 1190, 1190T, 1290T, 1390, 215B, 215C, 215D, 219D, 225, 225D, 229, 2290, 229D, 231D, 2390, 2391, 2491, 2590, 320B, 320B FM LL, 320B L, 320C, 322B L, 322B LN, 325 L, 325 LN, 325B L, 330B L, 330C, ...
12E, 12G, 16, 16G, 215, 215B, 215D, 219D, 225, 225D, 229, 229D, 231D, 235, 235B, 235C, 235D, 245, 245B, 245D, 30/30, 307B, 312, 312D, 312D L, 314D CR, 314D LCR, 315, 315D L, 317, 3192, 319D, 319D L, 3...
1190, 1190T, 1290T, 1390, 14E, 2390, 2391, 2491, 2590, 30/30, 325D FM, 325D FM LL, 330B L, 330C FM, 330C L, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336E, 345C, 345C L, 3...
311C, 315C, 315D L, 318B, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321B, 321C, 321D LCR, 322B, 322B LN, 323D ...
320B, 320C, 320C FM, 320D, 320D FM, 320D FM RR, 322B L, 322C, 322C FM, 323D LN, 323D SA, 324D, 324D L, 324D LN, 325 L, 325B, 325B L, 325C, 325C FM, 325D, 325D L, 325D MH, 329D, 329D L, 329D LN, OEMS
325, 325 L, 325 LN, OEMS
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 14...
120G, 12G, 130G, 140G, 160G
120G, 12G, 130G, 140G, 160G
5P8396
BALL BEARING
120G, 12G, 130G, 140G
120G, 12G, 130G, 140G
120G, 12G, 130G, 140G, 160G
2922320
BALL BEARING
D7R II, D8T
D7R II, D8T
14G, 14H, 14H NA, 16G, 16H, 16H NA
14G, 14H, 14H NA, 16G, 16H, 16H NA
5P7602
BALL BEARING
14G, 14H, 14H NA, 16G, 16H, 16H NA
14G, 14H, 14H NA, 16G, 16H, 16H NA
14G, 14H, 14H NA, 16G, 16H, 16H NA
9U9693
BALL BEARING
120G, 120H, 12G, 12H, 12H NA, 130G, 140G, 140H, 140H NA, 14H, 14H NA, 160G, 16G, 16H, 16H NA, 24H
120G, 120H, 12G, 12H, 12H NA, 130G, 140G, 140H, 140H NA, 14H, 14H NA, 160G, 16G, 16H, 16H NA, 24H
2228288
BALL BEARING
330C, 330C L, 345B, 345B II, 345B II MH, 345B L, W345B II
330C, 330C L, 345B, 345B II, 345B II MH, 345B L, W345B II