BALL BEARING 3792185 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     138-7575     Link Bracket     2    
B     1P-2420     Transmission Repair Stand     1    
C     -     1/2 - 13 by 3 Inch
Forcing Bolt     2    Start By:
Separate the transmission from the transfer gears. Refer to Disassembly and Assembly, "Transmission from Transfer Gears - Separate".
Illustration 1 g01306580
Attach Tooling (A) and a suitable lifting device to transmission assembly (1). The weight of transmission assembly (1) is approximately 2132 kg (4700 lb). Install transmission assembly (1) onto Tooling (B) .
Illustration 2 g01306581
Remove O-ring seal (3). Remove bolts (2) .
Illustration 3 g01306583
Attach Tooling (A) and a suitable lifting device to planetary assembly (4). The weight of planetary assembly (4) is approximately 533 kg (1175 lb). Use Tooling (C), Tooling (A), and the suitable lifting device to remove planetary assembly (4) .
Illustration 4 g01306657
Illustration 5 g01306658
Remove guard (5). Remove two of bolts (6) and attach Tooling (A) and a suitable lifting device to planetary assembly (7). The weight of planetary assembly (7) is approximately 381 kg (840 lb).
Remove bolts (8) and planetary assembly (7) .
Illustration 6 g01306661
Illustration 7 g01306662
Note: Shaft (13) must be supported with suitable cribbing before the removal of retaining ring (11) .
Turn over planetary assembly (7) onto suitable cribbing. Attach Tooling (A) and a suitable lifting device to torque converter (9). The weight of torque converter (9) is approximately 125 kg (275 lb).
Remove retaining ring (11) and washer (12). Remove nuts (10) and torque converter (9) .