BALL JOINT AS 6Y3140 - Caterpillar

Installation Procedure
Table 1
Required Tools    
Tool    Part Number    Part Description    Qty    
A     189-0411     Shackle As     2    Note: The cooling system components and weights may vary depending on your arrangement.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01225897
Attach Tooling (A) and a suitable lifting device to radiator group (7) . The weight of radiator group (7) is approximately 2050 kg (4500 lb).
Illustration 2 g01225904
Position radiator group (7) by engine (10) .
Illustration 3 g01225902
Illustration 4 g01225901
Install bolts (9) and bolts (8) on both sides.
Illustration 5 g01225893
Install belts (6) .
Illustration 6 g01225892
Install guard assemblies (5) .
Illustration 7 g01225867
Connect elbow (4) .
Illustration 8 g01225865
Connect tube assembly (3) .
Illustration 9 g01225862
Connect tube assemblies (1) .
Connect harness assemblies (2) .
Fill the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" or Operation and Maintenance Manual, "Cooling System Coolant (DEAC) - Change".