BALL BEARING 9U8017 - Caterpillar

Illustration 1 g03506052
Table 1
Specification for 420-3145 Muffler and Mounting Gp
Item Qty Part Specification Description
1 1 388-7019 Bent Bolt Clamp Torque to 68 4 N m (50 3 lb ft).
2 4 8T-4244 Nut Torque to 50 10 N m (37 7 lb ft).
3 4 8T-4244 Nut Torque to 15 3 N m (133 27 lb in).
4 - - Tighten the drain plug to 16 2 N m (142 18 lb in).
5 - - Tighten the clamp bolt to 68 12 N m (50 9 lb ft).
6 Before assembly, apply thin coat of 2P-2333 Sealant to the outside diameter of the male end. Remove the excess sealer from the assembled joints before clamp assembly.
Consider the groove of the 289-2492 Muffler Clamp as a visual guide and tighten the bolt. Tighten the bolt until the groove of the clamp is half closed
7 - - Before assembly, apply thin coat of 2P-2333 Sealant to taper of turbocharger outlet pipe.
Remove the excess sealer from the assembled joints before clamp assembly.