9U9657 BALL BEARING Caterpillar parts
950F, 950F II, 960F
Rating:
Alternative (cross code) number:
CA9U9657
9U-9657
9U9657
CA9U9657
9U-9657
9U9657
Weight: 2 pounds 0 kg.
WHEEL LOADER,
Related part:
9U9657
BEARING-BALL-YM
3714308
CL
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
CTP 9U9657 Ball Bearing for Heavy Equipment
CTP Bearing Only || Sold in each || Easy in-and-out fit || Country of origin: United States
CTP Bearing Only || Sold in each || Easy in-and-out fit || Country of origin: United States
CTP 9U9657 Ball Bearing for Heavy Equipment
CTP Bearing Only || Sold in each || Easy in-and-out fit || Country of origin: United States
CTP Bearing Only || Sold in each || Easy in-and-out fit || Country of origin: United States
Number on catalog scheme:
30
For full view, you need register
Information:
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0510 Driver Group 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00573618
Use Tool (A) to install two bearings (1) in the oil pump housing. The position of the bearing joint (2) must be within 30 15° of the centerline. The bearings must be installed so that the bearings are flush with the oil pump housing.
Install the dowels in the oil pump body. Install the dowel so the dowels extend 6.40 mm (0.252 inch) above the surface of the oil pump housing.
Illustration 2 g00573673
Put clean engine oil on the inside diameter of the bearings in the oil pump body. Put clean engine oil on shaft (3) and shaft (4).
Install shafts (3) and (4) in the oil pump housing.
Illustration 3 g00573690
Use Tool (A) to install two bearings (5) in cover (7), if the cover is equipped with bearings. The position of the bearing joint (6) must be within 30 15° of the centerline. The bearings must be installed so that the bearings are flush with the cover. Put clean engine oil on the inside diameter of each bearing.
Illustration 4 g00573718
Install cover (7) on the oil pump housing.
Install plunger (8) and spring (9) in the oil pump housing. Install retainer (10).
Illustration 5 g00573720
Install key (11) in shaft (4).
Illustration 6 g00573725
Install gear (13) on the oil pump shaft. Install bolt (12) and tighten the bolt to a torque of 55 10 N m (41 7 lb ft).
The engine oil pump must turn freely after assembly. End By:
Install the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0510 Driver Group 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00573618
Use Tool (A) to install two bearings (1) in the oil pump housing. The position of the bearing joint (2) must be within 30 15° of the centerline. The bearings must be installed so that the bearings are flush with the oil pump housing.
Install the dowels in the oil pump body. Install the dowel so the dowels extend 6.40 mm (0.252 inch) above the surface of the oil pump housing.
Illustration 2 g00573673
Put clean engine oil on the inside diameter of the bearings in the oil pump body. Put clean engine oil on shaft (3) and shaft (4).
Install shafts (3) and (4) in the oil pump housing.
Illustration 3 g00573690
Use Tool (A) to install two bearings (5) in cover (7), if the cover is equipped with bearings. The position of the bearing joint (6) must be within 30 15° of the centerline. The bearings must be installed so that the bearings are flush with the cover. Put clean engine oil on the inside diameter of each bearing.
Illustration 4 g00573718
Install cover (7) on the oil pump housing.
Install plunger (8) and spring (9) in the oil pump housing. Install retainer (10).
Illustration 5 g00573720
Install key (11) in shaft (4).
Illustration 6 g00573725
Install gear (13) on the oil pump shaft. Install bolt (12) and tighten the bolt to a torque of 55 10 N m (41 7 lb ft).
The engine oil pump must turn freely after assembly. End By:
Install the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Install".
Caterpillar parts catalog:
Parts ball Caterpillar catalog:
120B, 120G, 12E, 12G, 12H, 12H ES, 12H NA, 130G, 140B, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H, 14H NA, 153, 16, 160G, 160H, 160H ES, 160H NA, 163H NA, 1673B, 1673C, 1693, 16G, 16H, 16H NA, 173B,...
120B, 120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12E, 12F, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 140, 140B, 140G, 140H, 140H ES, 140H NA, 140...
120G, 120H, 12G, 12H, 12H NA, 130G, 140G, 140H, 140H NA, 14G, 14H, 14H NA, 160G, 16G, 16H, 16H NA, 416B, 416C, 416D, 420D, 424D, 426, 426B, 426C, 428, 428B, 428C, 428D, 430D, 432D, 436C, 438B, 438C, 4...
120M, 127, 12M, 140M, 143H, 14M, 160M, 163H, 163H NA, 16M, 30/30, 3176, 3176B, 35, 3512, 446, 446B, 45, 517, 525D, 535D, 545D, 55, 555D, 561M, 561N, 57, 572G, 578, 58, 583K, 594H, 613C, 613C II, 613G,...
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14H, 14H NA, 160G, 160H, 160H ES, 160H NA, 160K, 163H,...
12E, 153, 16, 163, 16G, 172, 173B, 183B, 191, 245, 3406, 3406B, 3408, 3408B, 3408C, 3412, 375, 561B, 572G, 578, 583H, 583K, 589, 594, 594H, 611, 613C, 613C II, 613G, 615, 615C, 621, 621B, 621E, 623, 6...
3116, 3126, 3126B, 561M, 814F II, 815F II, 816F II, 924F, 928G, 938G, 950F, 950G, 953C, 962G, 963B, 963C, AP-655C, C-9, C7, C9, CP-433E, CS-423E, CS-433E, CX31-C9I, D5M, D6M, IT28G, TH31-E61
120B, 140B, 30/30, 611, 615, 615C, 627, 631E, 637E, 936, 936F, 950B, 950B/950E, 950F II, 950G, 950G II, 950H, 950K, 955K, 955L, 962G, 962G II, 962H, 962K, 966C, 977L, D250D, D250E, D250E II, D25C, D25...
525, 525B, 525C, 535B, 535C, 545, 545C, 613G, 814B, 814F, 814F II, 815B, 815F, 815F II, 816F, 816F II, 938G II, 938H, 950F II, 950G, 950G II, 950H, 950K, 962G, 962G II, 962H, 962K, 966F, 966F II, 966G...
24H, 24M, 517, 527, 561M, 561N, 589, 613C, 613C II, 613G, 651E, 657E, 657G, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793, 793B, 793C, 793D, 793F, 793F CMD, 793F OEM, 793F-XQ, 824C, 82...
517, 527, 561M, 561N, 936, 936F, 950B, 950B/950E, 950F, 950F II, 950G, 950G II, 950H, 960F, 962G, 962H, 966C, 966H, 966R, D4H XL, D4HTSK III, D5H, D5H XL, D5HTSK II, D5M, D5N, D5R LGP, D6M, D6N, D6N L...
613G, 938G II, 938H, 950F II, 950G, 950G II, 950H, 950K, 962G, 962G II, 962H, 962K, D5R LGP, D6M, D6N, D6N LGP, D6N OEM, IT38G II, IT38H, IT62G, IT62G II, IT62H, R1300G II
7X9867
BALL
980F, CB-334D, CB-334E, CB-335D, CB-34, CB-434, D350E, D400E
980F, CB-334D, CB-334E, CB-335D, CB-34, CB-434, D350E, D400E
814B, 814F, 815B, 815F, 816F, 966D, 966F, 966F II, 970F, R1300, R1300G, R1700 II, R1700G, R2900, R2900G, R3000H
1052036
BALL BEARING
993K, 994, 994D, 994F, 994H
993K, 994, 994D, 994F, 994H
785, 789, 793, 990, 990 II, 992C, 992D, 992G, 994, D10, D11N, D11R
6Y3424
BALL BEARING
785, 992C, 994
785, 992C, 994
5P4904
BALL BEARING
990, 990 II, 992C, 992D, 992G, 994, D10, D11N, D11R
990, 990 II, 992C, 992D, 992G, 994, D10, D11N, D11R
325C, 328D LCR, 330C, 330C FM, 330C L, 330C MH, 330D, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L, 993K
993K
2146489
BALL
834G, 834H, 988G, 988H, 988K, 990K, 992K, 993K, 994H
834G, 834H, 988G, 988H, 988K, 990K, 992K, 993K, 994H
325 L, 784B, 785B, 785C, 789B, 789C, 793B, 793C, 994D
1335910
BALL BEARING
325 L, 784B, 785B, 785C, 789B, 789C, 793B, 793C, 994D
325 L, 784B, 785B, 785C, 789B, 789C, 793B, 793C, 994D
1G9732
BALL
24H, 777F, 777G, 797, 797B, 834B, 836, 988F II, 993K, PM-565, R2900, R2900G, R3000H
24H, 777F, 777G, 797, 797B, 834B, 836, 988F II, 993K, PM-565, R2900, R2900G, R3000H