BAND-BEAD SEAT 1047217 - Caterpillar

Illustration 1 g03795928
(1) Return filter
(2) Hydraulic oil level gauge
(3) Hydraulic tank cap
(4) Return filter
Illustration 2 g03795950
(5) Material feed charge filter Note: Refer to Operation and Maintenance Manual, "General Hazard Information" for information on containing fluid spillage.
Remove hydraulic tank cap (3) in order to relieve pressure from the hydraulic system.
Remove the cover for the return filter (1). Remove the charge filter.
Remove the return filter cover (4). Remove the return filter.
Remove material feed charge filter (5).
Install a new charge filter. Install the cover for the return filter (1).
Install a new return filter. Install the return filter cover (4).
Install a new material feed charge filter (5).
Check the hydraulic oil level with oil level gauge (2). Maintain the oil level between the "FULL" mark and the "ADD" mark.
Add additional oil if the oil level is below the "ADD" mark.
Install hydraulic tank cap (3).