BAR 0694175 - Caterpillar

Illustration 1 g03783803
Typical example
Table 1
Specification for 377-1305 Tailgate Gp and 384-7353 Tailgate Ar
Item Qty Part Specification Description
1 4 6V-7676 Nut Not to be torque tightened.
Tighten to achieve minimum clearance to allow the link to rotate freely.
2 4 8T-4778 Locknut Not to be torque tightened.
Tighten to achieve minimum clearance to allow the link to rotate freely.
3 2 257-7245 Link Chain to become taut at 4 degree body tip.
To compensate for difference in tension between the left and right-hand chains, two short links can be fitted to one side. This will allow for a 10 mm (0.4 inch) adjustment from one side to the other.
4 2 257-7244 Link Chain to become taut at 4 degree body tip.
To compensate for difference in tension between the left and right-hand chains, two short links can be fitted to one side. This will allow for a 10 mm (0.4 inch) adjustment from one side to the other.
5 2 154-4812 Shock Absorber As Ensure that shock absorbers are in contact with upper body surface.
6 6 337-0716 Shim As required, use 337-0716 Shim of 6 mm (0.2 inch) thickness.
Use maximum of three shims per side.
Assemble shim with open end of slot to the rear of the machine.
7 8 7X-2557 Bolt Torque to 270 40 N m (199 30 lb ft).
8 8 7X-2558 Bolt Torque to 270 40 N m (199 30 lb ft).
When two or three shims are fitted use, 7X-2558 Bolt.
Illustration 2 g03783805
Table 2
Item Qty Part Specification Description
9 18 8T-4173 Bolt Torque to 270 40 N m (199 30 lb ft).
When shims used for 15.0 to 19.0 mm (0.59 to 0.75 inch) thickness use, 8T-4173 Bolt.
10 18 7X-2556 Bolt Torque to 270 40 N m (199 30 lb ft).
When shims used for 5.0 to 14.0 mm (0.20 to 0.55 inch) thickness use, 7X-2556 Bolt
11 18 8T-4175 Bolt Torque to 270 40 N m (199 30 lb ft).
12 12 154-6369 Shim As required, use 154-6369 Shim of 3.0 mm (0.12 inch) thickness.
Use maximum of six shims per side.
13 4 169-4040 Shim As required, use the shim of thickness 2.0 mm (0.08 inch) for tailgate plate assembly to body clearance and contact between shock absorbers and body.
Use maximum of two shims per side.
14 2 360-4699 Shim As required, use 360-4699 Shim of 1.0 mm (0.04 inch) thickness.
Use maximum of one shim per side.
D - - Gap between tailgate and body is 6.0 to 12.0 mm (0.24 to 0.47 inch).
E - - Bottom of tailgate to underside of scow plate is 7.0 4.0 mm (0.28 0.16 inch).
15 2 3U-2837 Thrust Pad Ensure that arm and thrust washer are seated against pivot-tailgate casting face.
16 2 9X-8913 Bolt Torque to 460 35 N m (339 26 lb ft).
17 4 192-9067 Bushing Bore is 76.97 0.04 mm (3.030 0.002 inch).