BAR-HANDLED 1605119 - Caterpillar

Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-9200 Lever Puller Hoist 1
C 1P-1832 Adapter 1
5P-4776 Tool Stud 1
9U-6833 Nut 1
5P-8250 Washer 1
6V-3160 Double Acting Cylinder 1
3S-6224 Electric Hydraulic Pump Gp 1
5F-7693 Spacer As 1
D 1P-0510 Driver Gp 1
E 1P-1836 Bearing Puller Adapter 1
1U-7758 Stud 1
9U-6832 Nut 1
4K-0684 Hard Washer 1
6V-3170 Double Acting Cylinder 1
3S-6224 Electric Hydraulic Pump Gp 1
5P-4197 Spacer 1
F 123-3804 Bearing Puller Adapter 1
1U-7758 Stud 1
9U-6832 Nut 1
4K-0684 Hard Washer 1
6V-3170 Double Acting Cylinder 1
3S-6224 Electric Hydraulic Pump Gp 1
Illustration 1 g01028635
Use Tooling (E) to install bushings (13).
Illustration 2 g01013133
Illustration 3 g01013136
Use Tooling (F) to install bearing (12).
Use Tooling (D) to install seals (11).
Illustration 4 g01013051
Attach a suitable lifting device to centershift lock bar (8). The weight for centershift lock bar (8) is approximately 79 kg (175 lb).
Position centershift lock bar (8) to the original location and install pin (10), and the lock.
Illustration 5 g01013049
Attach a suitable lifting device to opposite side of centershift lock bar (8).
Position centershift lock bar (8) and install pin (9).
Install lock (7) and bolts (6).
Illustration 6 g01013047
Attach a suitable lifting device to centershift cylinder (2).
Position centershift cylinder (2). Use the machine to position the cylinder rod.
Install cap (4) and bolts (3).
Illustration 7 g01028632
Remove Tooling (A) and a suitable lifting device from blade lift arms (1).