BAR AS 1809096 - Caterpillar

Introduction
This instruction provides the necessary procedure in order to install the 152-8151 Warning Beacon Lighting . The 152-8151 Warning Beacon Lighting signals that the machine is in operation. The 152-8151 Warning Beacon Lighting also signals a possible hazard.The information in this instruction should be read and understood before proceeding with any modifications.Required Parts
Table 1
Required Parts    
Item     Qty     Part Number     Description    
1     1     109-2350     Switch    
2     1     9W-1442     Fuse    
3     1     128-6985     Warning Beacon Lamp    Machine Preparation
Park the machine. See the Operation and Maintenance Manual, SEBU7152-02 November, "301.5 Mini Hydraulic Excavator", "Machine Parking" 109-2350 Switch Installation
Illustration 1 g00528816
109-2350 Switch (1) .
Open the left side console.
Locate an electrical harness with a spare connector.
Push the connector through the opening in the front of the left side console.
Attach 109-2350 Switch to the connector.
Push the 109-2350 Switch in the opening on the left side of the console. Fuse Installation
Raise the operator's seat. Open the storage compartment in order to access the fuse panel.
Illustration 2 g00529017
Fuse Panel. 9W-1442 Fuse (2)
Insert the 9W-1442 Fuse in the fuse panel. See Illustration 2.
Close the storage compartment and lower the seat. 128-6985 Warning Beacon Lamp Installation
Illustration 3 g00526127
Place the 128-6985 Warning Beacon Lamp on the top of the cab. See Illustration 1
Illustration 4 g00368253
Push the connector of the 128-6985 Warning Beacon Lamp into the connector on the top right side of the cab. See illustration 4
Check operation of machine.