BAR (R.H.) 1V6324 - Caterpillar

Illustration 1 g01445193
(1) Torque for nut Tighten to ... 200 40 N m (150 29 lb ft) (2) The adjuster must be set before plate assembly is assembled into frame assembly. In order to set the adjuster, measure mainframe wall and carriage assembly. wear pad thickness. The sum of these two measurements should equal the amount that the adjuster protrudes beyond a plane created by the three closest wear pads on the plate assembley. ... 0.5 mm (0.02 inch) (3) Apply 4C-5590 Anti-Seize Compound to the threads of the bolts.Note: See carriage group extender drawing for information about resetting adjusters to tighten sandwich joint created by plate assembly and carriage assembly. Carriage group extender drawing also contains information about replacement of wear pads.Note: Coat contact surfaces with lubricant