BAR 35MM RD 2206909 - Caterpillar

Removal Procedure
Start By:
Connect the steering frame lock.
Turn the battery disconnect switch to the OFF position.
Illustration 1 g03340261
Illustration 2 g03340269
Illustration 3 g03340329
Remove screws (1) and screws (3). Move floor mat (4) out of the way. Cut cable straps (7) and move harness assembly (8) out of the way. Remove screws (5). Move instrument panel (2) and panel (6) out of the way.
Illustration 4 g03340334
Disconnect harness assembly (9).
Illustration 5 g03340335
Disconnect hose (12). Remove bolts (11) and remove wiper assembly (10).
Illustration 6 g03340340
Remove cap (13). Remove nuts (14) and (15). Repeat this step for the remaining cap and nuts.
Illustration 7 g03340354
Remove front wiper motor (16). Installation Procedure
Install front wiper motor (16) in the reverse order of removal.
Tighten bolts (11) to a torque of 14 2 N m (124 18 lb in).
Tighten nuts (14) to a torque of 32 2 N m (24 1 lb ft).
Tighten nuts (15) to a torque of 13 2 N m (115 18 lb in).