BAR GP-EQUALIZER 2818488 - Caterpillar

Remove & Install Fuel Filter & Fuel Filter Base
1. Use Tool (A) and remove fuel filter (5). 2. Disconnect hose assemblies (1) and (2) from fuel filter base (4). Cap and plug immediately.3. Remove two bolts (3) and the washers that hold fuel filter base (4) in position. Remove fuel filter base (4).4. If necessary, remove the fuel priming pump from the fuel filter base (4). See the topic "Remove Fuel Priming Pump" in this module.5. If necessary, remove the fuel filter mounting stud from the fuel filter base (4). The following steps are for the installation of the fuel filter and fuel filter base.6. If the fuel filter mounting stud was removed from the fuel filter base, reinstall it. Put 9S3263 Thread Lock on the tapered end of the stud to a distance of 7.6 mm (.30 in). Install the stud in the fuel filter base, and tighten it to a torque of 70 15 N m (50 11 lb ft).7. If the fuel priming pump was removed, install the fuel priming pump on the fuel filter base (4). See the topic "Install Fuel Priming Pump" in this module.8. Put fuel filter base (4) in position on the engine, and install two washers and bolts (3) that hold it.9. Connect hose assemblies (1) and (2) to fuel filter base (4).10. Install a new fuel filter (5). Follow the instructions on the fuel filter for the installation procedure.