BAR GP-SPRAY 2838093 - Caterpillar

2. Loosen the water inlet bonnet hose clamps (5), and slide the hose (1) back on bonnet (2).3. Remove oil filter case (7) and element.4. Remove air compressor air inlet line (3).5. Remove the oil cooler-to-elbow assembly mounting bolts (4).6. Remove the two support bracket mounting bolts (6). Remove the engine oil cooler and oil filter base as a unit.7. Separate the oil filter base from oil cooler.Install Engine Oil Cooler
1. Position the oil filter base on the oil cooler, and install mounting bolts.2. Position the oil filter base and engine oil cooler on the engine, and install the four oil cooler-to-elbow assembly mounting bolts.3. Install the two support bracket mounting bolts.4. Install the air compressor air inlet line.5. Position the water inlet hose, and tighten the hose clamps.6. Install the oil filter element and case.7. Fill the engine cooling system. Check the oil level in crankcase after starting engine.