BAR 3P2673 - Caterpillar

(1) Loosen adapter (1) and remove the complete valve assembly from valve body (2). (2) Clean the threads on rod (3) and at location (A) on cylinder (4). Install nut (5) and knob (6) on rod (3), then tighten nut (5).(3) Put gasket (7) on cylinder (4) and install the cylinder in the location where valve (1) was originally installed. Tighten cylinder (4) and be sure there is good access to plug (8).(4) Remove plug (8). Use the necessary fittings and connect the remote shut-off switch to the port where plug (8) was removed.Installation of 5N6336 Gauge Group
(1) Disconnect hose (1) that connects to the fuel rack shut-off. Remove elbow (2). (2) Install 2D7325 Tee (3) in the port where elbow (2) was removed. Install 321267 Connector (4) and 8N5211 Indicator (5) into tee (3) as shown. Connect hose (1) to connector (4).