BAR 5423349 - Caterpillar

Removal Procedure
Illustration 1 g00579308
Remove snap ring (3) .
Remove pin (4) from mounting bracket (1) .
Remove mounting bracket (1) from auger drive (2) .
Illustration 2 g00579314
Lay auger drive (2) on the side opposite of the hydraulic hoses.
Remove snap ring (7) .
Remove pin (6) .
Remove drive housing bracket (1) from auger drive (5) .Installation Procedure
Illustration 3 g00579315
Align drive housing bracket (1) with auger drive (2) so that pivot stops (3) face the front of auger drive (2) .
Install pin (4).
Install snap ring (5) .
Illustration 4 g00579309
Align mounting bracket (6) with auger drive (7) so that pivot stop (2) faces the front of auger drive (7) .
Install pin (9) .
Install snap ring (8) .