BAR 8J7845 - Caterpillar

Table 1
Required Parts    
Item    Qty    Part Number    Description    
1     1     365-0399     Ejector    
2     1     343-0596     Band Clamp    
3     1     444-7551     Hose    The new Dust Ejector As is adaptable to the following machines:
980K (S/N: GTZ1-672)
980K (S/N: W7K1-2157)
980K (S/N: NEP1-114)The new Dust Ejector As is effective in production on the following machines:
980K (S/N: GTZ673-UP)
980K (S/N: W7K2158-UP)
980K (S/N: NEP115-UP)Procedure
Illustration 1 g03526181
View from left side of the vehicle (1) 365-0399 Ejector (2) 343-0596 Band Clamp (3) 444-7551 Hose
Illustration 2 g03526182
View from top of machine with hood closed and 316-7190 Exhaust Extension Pipe As removed (1) 365-0399 Ejector
Replace existing Dust Ejector As with the new Dust Ejector As (1). Use a new Band Clamp (2) to connect the new Tube As to the Diesel Particulate Filter. Refer to Illustration 1.Note: Do not tighten Band Clamp (2) until you have verified the alignment of Dust Ejector As (1) is correct. Ensure that the outlet of the new Dust Ejector As (1) is level and centered in the hood stack. Refer to Illustration 2.
Replace existing Molded Hose with the new Molded Hose (3). Refer to Illustration 1.
Tighten Band Clamp (2) to 55 8 N m (41 6 lb ft). Refer to Illustration 1.