BAR 8Y5101 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5P-8665 Cylinder Liner Puller 1 Start By:
Remove the pistons and connecting rods.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change" for the correct draining and filling procedures.
Place covers over the crankshaft journals in order to shield the journals from dirt and coolant.
Use Tooling (A) in order to remove the cylinder liner.
Illustration 1 g01004731
Remove O-ring seals (1) and filler band (3) from cylinder liner (2).