AVSPARE.COM
parts catalog

BAR, SPACER R.H. B139784 - Caterpillar



B139784 BAR, SPACER R.H. Caterpillar parts CB-614 BAR
Rating:
34
Alternative (cross code) number:
CAB139784
B13-9784
B139784
Caterpillar B139784 BAR, SPACER R.H.

Buy BAR, SPACER R.H. B139784 Caterpillar genuine, new aftermarket tractor parts with delivery
VIBRATORY COMPACTOR,

Compatible equipment models: B139784:

VIBRATORY COMPACTOR  CB-614   Caterpillar
Number on catalog scheme: 1
 
  For full view, you need register

Information:


When testing and adjusting the transmission and power train, move the machine to an area clear of obstructions, with safe exhaust ventilation for the exhausts. Sudden movement of the machine or release of oil under pressure can cause injury to persons on or near the machine. To prevent possible injury, do the procedure that follows before testing and adjusting the transmission and power train.
Personal injury can result from spring force released when removing cap screws.Internal spring force will be released when cylinder assembly cap screws are removed causing injury.Always restrain cover as cap screws are loosened.Follow the established procedure in the Service Manual to service these parts.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Stop the machine. Engage the parking brake and turn off the engine.
Illustration 1 g01373894
(1) Transmission control valve
(2) Guard
Remove guard (2) from transmission control valve (1). This will provide access to the control.
Illustration 2 g01373893
Pressure Tap Port
(3) Caps
Put blocks in front of the wheels and behind the wheels of the machine. Remove the differential drive shaft.
Remove caps (3) and install 6000 kPa (870 psi) pressure gauges on pressure tap (D) and pressure tap (G).
Operate the engine at low idle either in the PARK position or NEUTRAL position. Record the gauge pressures. Pressure tap (D) is clutch 8 and pressure tap (G) is clutch 5. Remove the pressure gauges and replace caps (3).
Remove caps (3) and install 6000 kPa (870 psi) pressure gauges on the pressure tap (B), pressure tap (F) and pressure tap (H).
Operate the engine at low idle in FIRST GEAR FORWARD. Record the gauge pressures. Pressure tap (B) is clutch 1. Pressure tap (F) is clutch 6 and pressure tap (H) is clutch 7. Remove the pressure gauges and replace caps (3).
Remove caps (3) and install 6000 kPa (870 psi) pressure gauges on pressure tap (C) and pressure tap (E).
Operate the engine at low idle in SECOND GEAR FORWARD. Record the gauge pressure. Pressure tap (C) is clutch 2 and pressure tap (E) is clutch 4. Remove the pressure gauges and replace caps (3).
Remove cap (3) and install a 6000 kPa (870 psi) pressure gauge on the pressure tap (A).
Operate the engine at low idle in the FIRST GEAR REVERSE position. Record the gauge pressure. Pressure tap (A) is clutch 3. Remove the pressure gauges and replace cap (3).
Refer to Table 1 for the correct pressures. If an adjustment is needed, refer to Systems Operation, Testing and Adjusting, "Initial Pressures - Test and Adjust".
Table 1
Test port Minimum Pressure (1) Maximum Pressure (1)
A-3 2145 kPa (311 psi) 2365 kPa (343 psi)
B-1 2080 kPa (302 psi) 2275 kPa (330 psi)
C-2

Caterpillar parts catalog:

Caterpillar parts catalog
CB-614 VIBRATORY COMPACTOR 7CD00001-00115 (MACHINE)


Parts bar Caterpillar catalog:

1206537 BAR
CB-614, D8R, D8R II
1206537 BAR
CB-614, D8R, D8R II
01009122 BAR, TIE DOWN
PS-110, PS-130, PS-180
E230137 BAR, RETAINER
CB-414, PS-110, PS-130, PS-180
A075040 BAR, BACK-UP
PS-110, PS-130, PS-180
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.