BARREL AS-FP 20R5294 - Caterpillar

ACTION REQUIRED
Replace the existing 2519831/">251-9831 C-Frame.
Refer to the attached Rework Procedure.
Image1
OWNER NOTIFICATION
Owners in the following countries will receive the attached Owner Notification:
US
Canada
SERVICE CLAIM ALLOWANCES
Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
100% 100% 0% 0% 0% 0%
This is a 5.0-hour job
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE.
EXAMPLE COPY OF OWNER NOTIFICATION
XYZ Corporation
3240 Arrow Drive
Anywhere, YZ 99999
PRIORITY - PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 2519831 C-FRAME
MODELS INVOLVED - CERTAIN D6R TRACK-TYPE TRACTORS
Dear Cat Product Owner:
The 2519831/">251-9831 C-Frame needs to be replaced on the products listed below. The existing C-Frame may crack during machine operation and lead to machine downtime. You will not be charged for the service performed.
Contact your local Cat dealer immediately to schedule this service. The dealer will advise you of the time required to complete this service. Please refer the dealer to their Service Letter dated 06Oct2015 when scheduling this service.
We regret the inconvenience this may cause you, but urge you to have this service performed as soon as possible to prevent unscheduled downtime.
Caterpillar Inc.
Identification #(s)
Attached to 06Oct2015 Service Letter
Rework Procedure
Refer to REHS8548, Special Instruction, "Installation of the 6A (S/N: RTH) Bulldozer on a D6R2 and D6R Track-Type Tractor", section "Manual Tilt Cylinder Installation", in order to complete this Rework Procedure.
Note:
- The new C-Frame will be sent directly to dealer from the factory.
- A record of the C-Frame serial numbers will be provided with the new C-Frame for cross reference.
Note: Refer to the parts list in Image1.1.2 for replacement and reused parts.
Image1.1.1
Image1.1.2