3604597 BARREL AS-PUMP Caterpillar parts
330D L, 345C, 345C L, 345C MH, W345C MH
Rating:
Alternative (cross code) number:
CA3604597
360-4597
3604597
CA3604597
360-4597
3604597
Weight: 18 pounds 8 kg.
EXCAVATOR, WHEELED EXCAVATOR,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$9.91
28 Dec 2023
Amazon.com
Sunsong 3604597 Power Steering Return Line Hose Assembly
Sunsong Return Hoses exceed original equipment performance standards with a max working pressure of 250 psi and are suitable for low pressure high temperature operations. All tubing is manufactured from high grade steel and electroplated with a zinc coating delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime; Each hose is precision engineered to exact fit and includes brackets, grommets, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition.
Sunsong Return Hoses exceed original equipment performance standards with a max working pressure of 250 psi and are suitable for low pressure high temperature operations. All tubing is manufactured from high grade steel and electroplated with a zinc coating delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime; Each hose is precision engineered to exact fit and includes brackets, grommets, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition.
$11.16
07 Nov 2023
Amazon.com
Sunsong 3604597 Power Steering Return Line Hose Assembly
Sunsong Return Hoses exceed original equipment performance standards with a max working pressure of 250 psi and are suitable for low pressure high temperature operations. All tubing is manufactured from high grade steel and electroplated with a zinc coating delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime; Each hose is precision engineered to exact fit and includes brackets, grommets, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition.
Sunsong Return Hoses exceed original equipment performance standards with a max working pressure of 250 psi and are suitable for low pressure high temperature operations. All tubing is manufactured from high grade steel and electroplated with a zinc coating delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime; Each hose is precision engineered to exact fit and includes brackets, grommets, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition.
$14.89
31 Aug 2023
Amazon.com
Sunsong 3604597 Power Steering Return Line Hose Assembly
Sunsong Return Hoses exceed original equipment performance standards with a max working pressure of 250 psi and are suitable for low pressure high temperature operations. All tubing is manufactured from high grade steel and electroplated with a zinc coating delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime; Each hose is precision engineered to exact fit and includes brackets, grommets, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition.
Sunsong Return Hoses exceed original equipment performance standards with a max working pressure of 250 psi and are suitable for low pressure high temperature operations. All tubing is manufactured from high grade steel and electroplated with a zinc coating delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime; Each hose is precision engineered to exact fit and includes brackets, grommets, heat shields, bushings, and protective sleeves as required for to ensure that all wearable parts are restored to original condition.
Number on catalog scheme:
73
For full view, you need register
Compatible equipment models: 3604597:
Information:
Test Step 1. CHECK THE MECHANICAL CONNECTIONS
Turn the disconnect switch to the OFF position.
Turn the key start switch to the OFF position.
Visually inspect the mechanical connections for the right steering cylinder. Verify the following:
All mechanical connections and adjustments for the steering cylinder are in good condition.
None of the mechanical connections are loose.Expected Result:All mechanical connections for the steering cylinder are in good condition and no mechanical connections are loose.Results:
OK - All mechanical connections for the steering cylinder are correct. Proceed to Test Step 2.
NOT OK - All mechanical connections for the steering cylinder are not correct.Repair: Perform the maintenance that is required to correct the problem with the mechanical connections for the steering cylinder. After the problem has been corrected, verify that this diagnostic code is still active before proceeding with this procedure.STOPTest Step 2. CHECK FOR POWER AT THE SENSOR
The disconnect switch and the key start switch remain in the OFF position.
Do not disconnect the harness connector from the sensor.
At the back of the harness connector for the sensor, insert 7X-1710 Multimeter Probes along the contact of the supply 1 (wire A118-OR(Orange)). Insert a multimeter probe along return contact 2 (wire X719-OR(Orange)).
Turn the disconnect switch to the ON position.
Turn the key start switch to the ON position.
Measure the voltage from contact 1 to contact 2.Expected Result:The voltage measurement is 8 0.5 VDC.Results:
OK - The voltage measurement is 8 0.5 VDC. The power supply circuit is correct. Proceed to Test Step 3.
NOT OK - The voltage measurement is not 8 0.5 VDC. The power supply circuit is not correct.Repair: There is a problem with the power supply circuit for the sensor. Refer to the Electrical Schematic of the machine. Check all the connections that are in the power supply circuit and the return circuit. Inspect the connections for the following:
Connections are clean.
Connections are secure.
Connections are in good condition.Repair or replace the machine harness.STOPTest Step 3. CHECK THE SENSOR
Turn the disconnect switch to the OFF position.
Turn the key start switch to the OFF position.
Do not start the engine when performing this step. If the engine is started, any change in steering wheel position will result in a change to maximum wheel angle. Steering to maximum wheel angle may result in severe injury or death.
Fabricate six jumper wires long enough to jumper the left steering cylinder position sensor to the harness for the right steering cylinder position sensor.
Jumper the right steering cylinder position sensor connector to the left steering cylinder position sensor harness.
Jumper the left steering cylinder position sensor connector to the right steering cylinder position sensor harness.
Turn the disconnect switch to the ON position.
Turn the key start switch to the ON position.Note: Do not start the engine.
Observe the status of the active diagnostic code for the right steering sensor.Expected Result:When the harness connectors are switched, the CID 2201 FMI 2 diagnostic code for the left steering sensor is not active. A CID 2200 FMI 2 diagnostic code for the right steering sensor is now active.Results:
OK
Turn the disconnect switch to the OFF position.
Turn the key start switch to the OFF position.
Visually inspect the mechanical connections for the right steering cylinder. Verify the following:
All mechanical connections and adjustments for the steering cylinder are in good condition.
None of the mechanical connections are loose.Expected Result:All mechanical connections for the steering cylinder are in good condition and no mechanical connections are loose.Results:
OK - All mechanical connections for the steering cylinder are correct. Proceed to Test Step 2.
NOT OK - All mechanical connections for the steering cylinder are not correct.Repair: Perform the maintenance that is required to correct the problem with the mechanical connections for the steering cylinder. After the problem has been corrected, verify that this diagnostic code is still active before proceeding with this procedure.STOPTest Step 2. CHECK FOR POWER AT THE SENSOR
The disconnect switch and the key start switch remain in the OFF position.
Do not disconnect the harness connector from the sensor.
At the back of the harness connector for the sensor, insert 7X-1710 Multimeter Probes along the contact of the supply 1 (wire A118-OR(Orange)). Insert a multimeter probe along return contact 2 (wire X719-OR(Orange)).
Turn the disconnect switch to the ON position.
Turn the key start switch to the ON position.
Measure the voltage from contact 1 to contact 2.Expected Result:The voltage measurement is 8 0.5 VDC.Results:
OK - The voltage measurement is 8 0.5 VDC. The power supply circuit is correct. Proceed to Test Step 3.
NOT OK - The voltage measurement is not 8 0.5 VDC. The power supply circuit is not correct.Repair: There is a problem with the power supply circuit for the sensor. Refer to the Electrical Schematic of the machine. Check all the connections that are in the power supply circuit and the return circuit. Inspect the connections for the following:
Connections are clean.
Connections are secure.
Connections are in good condition.Repair or replace the machine harness.STOPTest Step 3. CHECK THE SENSOR
Turn the disconnect switch to the OFF position.
Turn the key start switch to the OFF position.
Do not start the engine when performing this step. If the engine is started, any change in steering wheel position will result in a change to maximum wheel angle. Steering to maximum wheel angle may result in severe injury or death.
Fabricate six jumper wires long enough to jumper the left steering cylinder position sensor to the harness for the right steering cylinder position sensor.
Jumper the right steering cylinder position sensor connector to the left steering cylinder position sensor harness.
Jumper the left steering cylinder position sensor connector to the right steering cylinder position sensor harness.
Turn the disconnect switch to the ON position.
Turn the key start switch to the ON position.Note: Do not start the engine.
Observe the status of the active diagnostic code for the right steering sensor.Expected Result:When the harness connectors are switched, the CID 2201 FMI 2 diagnostic code for the left steering sensor is not active. A CID 2200 FMI 2 diagnostic code for the right steering sensor is now active.Results:
OK
Caterpillar parts catalog:
Parts barrel Caterpillar catalog:
2470C, 2570C, 2670C, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 553C, 563C, 573C, 938G II, 950G II, 962G II, D6T LGP, D6T LGPPAT, D6T XL, D7E, D7E...
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H, 16H, 345B, 345B II, 345B II MH, 345B L, 345C, 345C L, 345C MH, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B, 651E, 657E, 657G, 797, 938G II...
2864C, 345C, 345C L, 345C MH, 365B L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 5090B, 586C, 824K, 825K, 826K, 966H, 966K, 966M XE, 972H, 972M XE, 980C, CP-533E, CP-54B, CP-56, CS-531C, CS...
120M 2, 12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 525D, 535D, 54...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 324E, 324E L, 324E LN, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D L, 325D M...
330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E HVG, 336E L, 336E LN, 340D L, 340D2 L, 568 FM LL, M330D
330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E HVG, 336E L, 336E LN, 340D L, 340D2 L, 568 FM LL, M330D
330D, 330D FM, 330D L, 330D LN, 330D MH, 345C, 345C L, 345C MH, M330D, W345C MH
330D, 330D FM, 330D L, 330D LN, 330D MH, 345C, 345C L, 345C MH, M330D, W345C MH
3604596
BARREL AS-PUMP
330D L, 345C, 345C L, 345C MH, W345C MH
330D L, 345C, 345C L, 345C MH, W345C MH
7I7558
BARREL AS
330, 330 FM L, 330 L, 345B, 345B II, 345B L, 345C, 345C L, 350, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, OEMS
330, 330 FM L, 330 L, 345B, 345B II, 345B L, 345C, 345C L, 350, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, OEMS
1241530
BARREL AS
330C, 330D L, 330D MH, 345B II, 345B II MH, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 374D L, 374F L
330C, 330D L, 330D MH, 345B II, 345B II MH, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 374D L, 374F L
330D, 330D FM, 330D L, 330D LN, 330D MH, 345C, 345C L, 345C MH, M330D, W345C MH
330D, 330D FM, 330D L, 330D LN, 330D MH, 345C, 345C L, 345C MH, M330D, W345C MH
3507782
BARREL
HF201, HF221
HF201, HF221
2236495
BARREL
533, 543, HA770, HA771, HA870, HA871, TK370, TK371, TK380, TK381
533, 543, HA770, HA771, HA870, HA871, TK370, TK371, TK380, TK381
2470480
BARREL
554
554
3751474
BARREL AS
HH44 DE
HH44 DE
3101384
BARREL AS-PUMP
M322D, M322D MH
M322D, M322D MH
3724711
BARREL
320D FM, HH44 DE, SAT223, SAT318T, SAT322
320D FM, HH44 DE, SAT223, SAT318T, SAT322
3620302
BARREL AS
320D FM, HH44 DE
320D FM, HH44 DE
3604596
BARREL AS-PUMP
330D L, 345C, 345C L, 345C MH, W345C MH
330D L, 345C, 345C L, 345C MH, W345C MH