6E4007 BARREL Caterpillar parts
426B, 69D
Rating:
Alternative (cross code) number:
CA6E4007
6E-4007
6E4007
CA6E4007
6E-4007
6E4007
Weight: 6 pounds 3 kg.
BACKHOE LOADER, TRUCK,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
MACAX Electronic Throttle Body Assembly S20432 Compatible with Volkswagen Beetle Golf Jetta Passat Rabbit 2.5L L5 Replaces 07K133062A 977-085 TB1303 67-4007 6E-4007
MACAX Notice: Make sure will fit your vehicle check"amazonconfirmedfit", Please use Amazon's Your Garage feature above to see if this part is compatible with your vehicle || Performance: Designed and manufactured to operate reliably under all operating conditions and throughout the entire engine speed range for peak engine performance || Design: MACAX Electronic Throttle Body Assembly are engineered for original equipment and replacement applications. Every component either matches or improves on the OE design to ensure fast and easy installation with superior performance and reliability || Compatible part numbers: S20432, 07K133062A, 07K-133-062-A, 07K-133-062A, 977-085, TB1303, 67-4007, 6E-4007 || Buy with Confidence: MACAX Electronic Throttle Body comes complete with a one-year unlimited-mileage after-sales service. Save time and money by taking advantage of this service,ensuring that you can hit the road with peace of mind.
MACAX Notice: Make sure will fit your vehicle check"amazonconfirmedfit", Please use Amazon's Your Garage feature above to see if this part is compatible with your vehicle || Performance: Designed and manufactured to operate reliably under all operating conditions and throughout the entire engine speed range for peak engine performance || Design: MACAX Electronic Throttle Body Assembly are engineered for original equipment and replacement applications. Every component either matches or improves on the OE design to ensure fast and easy installation with superior performance and reliability || Compatible part numbers: S20432, 07K133062A, 07K-133-062-A, 07K-133-062A, 977-085, TB1303, 67-4007, 6E-4007 || Buy with Confidence: MACAX Electronic Throttle Body comes complete with a one-year unlimited-mileage after-sales service. Save time and money by taking advantage of this service,ensuring that you can hit the road with peace of mind.
Fuel Injection Throttle Body - 6E-4007
CARDONE New Critical components used in manufacturing the electronic throttle body, including the housing, throttle plate, position sensors, throttle actuator motor and throttle plate return spring conform to precise O.E. dimensions. || Each throttle body is tested for all critical functions, including response time and air flow at multiple points, ensuring an optimal fuel/air ratio. || 100% computerized testing of motor, throttle position sensor and articulation ensures reliable and consistent performance. || Each unit is guaranteed to fit and function like the original.
CARDONE New Critical components used in manufacturing the electronic throttle body, including the housing, throttle plate, position sensors, throttle actuator motor and throttle plate return spring conform to precise O.E. dimensions. || Each throttle body is tested for all critical functions, including response time and air flow at multiple points, ensuring an optimal fuel/air ratio. || 100% computerized testing of motor, throttle position sensor and articulation ensures reliable and consistent performance. || Each unit is guaranteed to fit and function like the original.
Zoncar Electronic Throttle Body Compatible with Volk/swagen Je/tta Passat Beetle Golf Rabbit 2007-2014, L5 2.5L, 674007, S20432, 6E4007, 07K133062A
ZonCar [Vehicle Fitment]: The Electronic Throttle Body Compatible with Volk/swagen 2007-2014 Jett/a L5 2.5L, 2012-2014 Passat L5 2.5L, 2007-2010 Beetle, 2012-2014 Beetle L5 2.5L, 2010-2014 Golf, 2007-2009 Rabbit || [Reference Number]: The Electronic Throttle Body Reference Number: 674007,S20432,6E4007,07K133062A || [QUALITY]: Marsram throttle body is made of reinforced material for corrosion and heat resistance || [OE Fit]: Order with confidence. Each throttle body is thoroughly tested to make sure 100% OE fit ,ensure quality and reliability out of the box || [Customer Support]: Zoncar Electronic Throttle Body comes with a 1-Year Unlimited-Mileage Warranty. We extremely value your satisfaction and strive to provide you with a good shopping experience
ZonCar [Vehicle Fitment]: The Electronic Throttle Body Compatible with Volk/swagen 2007-2014 Jett/a L5 2.5L, 2012-2014 Passat L5 2.5L, 2007-2010 Beetle, 2012-2014 Beetle L5 2.5L, 2010-2014 Golf, 2007-2009 Rabbit || [Reference Number]: The Electronic Throttle Body Reference Number: 674007,S20432,6E4007,07K133062A || [QUALITY]: Marsram throttle body is made of reinforced material for corrosion and heat resistance || [OE Fit]: Order with confidence. Each throttle body is thoroughly tested to make sure 100% OE fit ,ensure quality and reliability out of the box || [Customer Support]: Zoncar Electronic Throttle Body comes with a 1-Year Unlimited-Mileage Warranty. We extremely value your satisfaction and strive to provide you with a good shopping experience
Number on catalog scheme:
4
For full view, you need register
6E4007
Images:
Information:
Ball Bearings
For ball bearings, use Caterpillar 2S-3230 Special Purpose Grease (SPG). This grease is an NLGI No. 2 Grade. There is Polyurea (a thickener) in this grease. The temperature range of Caterpillar 2S-3230 Special Purpose Grease (SPG) is −29 °C (−20.2 °F) to 177 °C (350.6 °F). For extremely low temperatures, use either NLGI No. 1 Grade or NLGI No. 0 Grade.Use 56.7 grams (2 ounces) of grease. Refer to the Lubrication Plate.Note: On standard applications, ball bearings should be lubricated at 2000 hour intervals.Note: On standby applications, ball bearings should be lubricated once per year.Spherical Roller Bearings
For spherical roller bearings, use Caterpillar 108-8611 Grease. This grease is an NLGI No. 1.5 Grade. There is no molybdenum disulfide in this grease. There is Clay (a thickener) in this grease. At 40 °C (104.0 °F), the viscosity of Caterpillar 108-8611 Grease is 32 cSt. At 100 °C (212.0 °F), the viscosity is 5 cSt.Use 28.3 grams (1 ounce) of grease. Refer to the information on the Lubrication Plate.Note: On standard applications, spherical roller bearings should be lubricated at 1000 hour intervals.Note: On standby applications, spherical roller bearings should be greased once per year.Lubrication Procedure
Remove either the louver assembly or the rear plate from the rear of the generator housing.
Remove the top grease pipe plug and remove the lower grease pipe plug.
Install a grease fitting in the grease pipe.
Grease the shielded ball bearings with 2S-3230 Grease (53.28 mL (1.8 ounces) to 59.20 mL (2.0 ounces)). Lubricate shielded ball bearings at 2000 hour intervals. Grease spherical roller bearings with 108-8611 Grease (29.6 mL (1 ounce)). Spherical roller bearings should be lubricated at 1000 hour intervals. Do not mix greases.Note: Some two-bearing generators have spherical roller bearings in the front bracket and ball bearings in the rear bracket. These units should use a common 108-8611 Grease. This grease should be used for the front bearing and the rear bearing.
Wipe off the excess grease. Remove the top grease fitting. Install the plug.
Operate the generator for one hour. This will allow the grease to expand. The expanding grease will force the excess grease from the cavity. When the excess grease is forced from the cavity, the internal pressure will be reduced. The generator should continue to operate until the grease stops purging.
Stop the engine. Install the plug in the bottom grease pipe. Wipe off the excess grease.
Install the louver assembly or install the rear plate.
For ball bearings, use Caterpillar 2S-3230 Special Purpose Grease (SPG). This grease is an NLGI No. 2 Grade. There is Polyurea (a thickener) in this grease. The temperature range of Caterpillar 2S-3230 Special Purpose Grease (SPG) is −29 °C (−20.2 °F) to 177 °C (350.6 °F). For extremely low temperatures, use either NLGI No. 1 Grade or NLGI No. 0 Grade.Use 56.7 grams (2 ounces) of grease. Refer to the Lubrication Plate.Note: On standard applications, ball bearings should be lubricated at 2000 hour intervals.Note: On standby applications, ball bearings should be lubricated once per year.Spherical Roller Bearings
For spherical roller bearings, use Caterpillar 108-8611 Grease. This grease is an NLGI No. 1.5 Grade. There is no molybdenum disulfide in this grease. There is Clay (a thickener) in this grease. At 40 °C (104.0 °F), the viscosity of Caterpillar 108-8611 Grease is 32 cSt. At 100 °C (212.0 °F), the viscosity is 5 cSt.Use 28.3 grams (1 ounce) of grease. Refer to the information on the Lubrication Plate.Note: On standard applications, spherical roller bearings should be lubricated at 1000 hour intervals.Note: On standby applications, spherical roller bearings should be greased once per year.Lubrication Procedure
Remove either the louver assembly or the rear plate from the rear of the generator housing.
Remove the top grease pipe plug and remove the lower grease pipe plug.
Install a grease fitting in the grease pipe.
Grease the shielded ball bearings with 2S-3230 Grease (53.28 mL (1.8 ounces) to 59.20 mL (2.0 ounces)). Lubricate shielded ball bearings at 2000 hour intervals. Grease spherical roller bearings with 108-8611 Grease (29.6 mL (1 ounce)). Spherical roller bearings should be lubricated at 1000 hour intervals. Do not mix greases.Note: Some two-bearing generators have spherical roller bearings in the front bracket and ball bearings in the rear bracket. These units should use a common 108-8611 Grease. This grease should be used for the front bearing and the rear bearing.
Wipe off the excess grease. Remove the top grease fitting. Install the plug.
Operate the generator for one hour. This will allow the grease to expand. The expanding grease will force the excess grease from the cavity. When the excess grease is forced from the cavity, the internal pressure will be reduced. The generator should continue to operate until the grease stops purging.
Stop the engine. Install the plug in the bottom grease pipe. Wipe off the excess grease.
Install the louver assembly or install the rear plate.
Caterpillar parts catalog:
Parts barrel Caterpillar catalog:
24M, 844H, 990H, C11, C13, C15, C18, C9, C9.3, CX31-C13I, CX31-C15I, CX31-C18I, CX31-C9I, CX35-C18I, CX35-P800, D5R LGP, D6K, D6K LGP, D6K XL, D6K2, D6K2 LGP, D6N, D6N LGP, D6N OEM, PM-201, TH31-E61, ...
2330455
BARREL
246C, 256C, 262C, 262C2, 272C, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C, 5110B, 824C, 824G II, 824H, 825G II, 825H, 826G II, 826H, 834G, 834H, 836H, 924G, 924GZ, 924H, 924HZ, 966...
246C, 256C, 262C, 262C2, 272C, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, 297C, 299C, 5110B, 824C, 824G II, 824H, 825G II, 825H, 826G II, 826H, 834G, 834H, 836H, 924G, 924GZ, 924H, 924HZ, 966...
1268899
BARREL
267, 267B, 287, CB-434B, CB-434C, CB-534B, CB-534C, CB-535B, CB-634, CB-634C
267, 267B, 287, CB-434B, CB-434C, CB-534B, CB-534C, CB-535B, CB-634, CB-634C
1744752
BARREL AS
TH62, TH82
TH62, TH82
246D, 262D, 272D, 277D, 279D, 287D, 289D, 299D, 35, 414E, 416E, 416F, 422E, 422F, 424B, 424B HD, 428E, 428F, 434E, 434F, 45, 55, 568 FM LL, 621H, 621K, 623H, 623K LRC, 627H, 627K LRC, 65E, 75E, 85E, 9...
2H2483
BARREL ASSEM.
1693, 651, 657, 666, 824, 955C, D315, D326F, D337, D337F, D342, D342C, D343, D353C
1693, 651, 657, 666, 824, 955C, D315, D326F, D337, D337F, D342, D342C, D343, D353C
2S0312
BARREL ASSEM.
641, 666, D9G, D9H
641, 666, D9G, D9H
9S8020
BARREL ASSEM.
1693, 631C, 769, 777, 992, D8K
1693, 631C, 769, 777, 992, D8K
1M6779
BARREL
1673, 966C, D334
1673, 966C, D334
938F, 938G, 938G II, D250D, D250E, D300D, D300E, IT38F, IT38G, IT38G II, PM-465, RM-350B, RR-250, RT100, RT50, SM-350, SS-250