BARRIER 1V4828 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     138-7575     Link Bracket     2    Start By:
Remove the engine enclosure. Refer to Disassembly and Assembly, "Engine Enclosure - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Personal injury can result from failure to disconnect the battery.First, disconnect the negative battery cable. Then, disconnect the positive battery cable.A positive power lead can cause sparks if the battery is not disconnected. Sparks can possibly result in battery explosion or fire.
Disconnect the battery. Refer to Operation and Maintenance Manual, "Battery or Battery Cable - Disconnect".
Illustration 1 g01206168
Disconnect hose (1) from air cleaner assembly (2). Remove air cleaner assembly (2) .
Illustration 2 g01206173
Remove cover (4) from operator control panel (3). Disconnect nut (5) from operator control panel (3) .
Illustration 3 g01206174
Disconnect harness assemblies (6), (7), (8), (9), and (10) .
Illustration 4 g01206176
Disconnect harness assemblies (11) and (12) .
Illustration 5 g01206186
Remove bolts (14) and guard assembly (15) from generator housing (13) .
Illustration 6 g01206208
Remove bolts (16) from generator housing (13) .
Illustration 7 g01206212
Attach Tooling (A) and a suitable lifting device to generator housing (13). The weight of generator housing (13) is approximately 68 kg (150 lb).
Illustration 8 g01206235
Raise generator housing (13) in order to install suitable cribbing under flywheel housing (18). Remove bolts (17) and generator housing (13) from flywheel housing (18) .
Illustration 9 g01206237
Attach a suitable lifting device to rotor assembly (19). The weight of rotor assembly (19) is approximately 34 kg (75 lb). Remove bolts (20) and rotor assembly (19) from flywheel (21) .