BASE GP-PEDAL 1515594 - Caterpillar

Bucket Lift Lever
Bucket Float Position (1.) - Push the lever all the way forward into detent for FLOAT. The bucket will lower to the ground and follow ground contour.The lever will remain in FLOAT until pulled out of detent. The lever will then return to HOLD when released.
NEVER use FLOAT position to lower a loaded bucket.
Bucket Lower Position (2.) - Push the lever forward from HOLD position to LOWER the bucket. The lever will return to HOLD when released. Bucket Hold Position (3.) - The lever will return to HOLD when released from either RAISE or LOWER. The bucket will remain in the position it is in. Bucket Raise Position (4.) - Pull the lever back to RAISE the bucket. Release the lever to stop lifting the bucket. The lever will return to HOLD when released.The lever is detented in the full raise position. It will stay in detent until the bucket reaches height set by the lift kickout. Then it returns to HOLD.Bucket Tilt Lever
Bucket Tilt - Dump Position (1.) - Push the lever forward to DUMP the bucket. Bucket Tilt - Hold Position (2.) - Release the tilt lever. The bucket will remain in the position it is in. Bucket Tilt - Tilt Back Position (3.) - Pull the lever back to tilt the bucket back.Log or Lumber Fork Lift Lever
1. Fork Float Position - Push the lever all the way forward into detent for fork FLOAT. The fork will lower to the ground and move up and down, following ground contour.The lever will remain in float until pulled out of detent. The lever will then return to HOLD when it is released.
NEVER use FLOAT position to lower a loaded fork.
Fork Lower Position (2.) - Push the lever forward to LOWER the fork. When the lever is released it will return to HOLD. Fork Hold Position (3.) - The lever will return to HOLD when it is released from either RAISE or LOWER. The fork will remain in the position it is in. Fork Raise Position (4.) - Pull the lever back to RAISE the fork. Release the lever to stop lifting the fork. Lever will return to HOLD when released.Log or Lumber Fork Tilt Lever
Fork Tilt Forward Position (1.) - Push the lever forward to tilt the fork FORWARD. The lever will return to HOLD when released. The fork will remain in the position it is in. Fork Tilt Hold Position (2.) - Release the tilt lever, and the fork will remain in the position it is in. Fork Tilt Back Position (3.) - Pull the lever back to tilt the fork BACK. Release the lever and it will return to HOLD. The fork will remain in the position it is in.Top Clamp Lever
Clamp Close Position (1.) - Push the lever forward to CLOSE the clamp. Release the lever and it will return to HOLD. Clamp Hold Position (2.) - Release the tilt lever. The clamp will remain in the position it is in. Clamp