BASE 2878976 - Caterpillar

Illustration 1 g06226730To enter the Service menu, refer to the following steps.
Select the application menu button on the bottom-left of the homescreen.
Select the “Setting” option to view the list of system configurations. A warning screen will display alerting the operator that camera screens are not available while navigating the settings menu. Read the screen and select OK to continue.
Illustration 2 g06226759
Right-side switch panel
(1) Jog Dial
Select "Service" option or navigate and select the menu option using the jog dial.
Enter a registered passcode and select “Enter”. If logging in using a Bluetooth Operator ID, wait for the system to detect the key. If the password is correct, the user will have access to the menu.Note: The initial user password is "1". The service password is "9992". After the password has been entered, press the "Enter" key.If the password is incorrect, "Incorrect Password" will be displayed. Press the "OK" button to retry the password in the previous screen.
Illustration 3 g06226761Once the password has been entered, the Service menu option will be active until machine is powered down (key OFF). On the next start (key ON), the password must be re-entered to enable the Service menu options again.