BASE GP- 2986574 - Caterpillar

Removal Procedure
Accidental engine starting can cause injury or death to personnel working on the equipment.To avoid accidental engine starting, disconnect the battery cable from the negative (−) battery terminal. Completely tape all metal surfaces of the disconnected battery cable end in order to prevent contact with other metal surfaces which could activate the engine electrical system.Place a Do Not Operate tag at the Start/Stop switch location to inform personnel that the equipment is being worked on.
Illustration 1 g06069008
Turn battery disconnect switch (1) to the OFF position.
Illustration 2 g03727556
Remove bolts (2) and guard (3).
Illustration 3 g03727560
Remove harness assembly (4). Remove cable (5).
Remove nut (9) and ground strap (8). Remove nuts (7) and electric starting motor (6). If a gasket is installed, remove gasket.Installation Procedure
Install electric starting motor (6) in the reverse order of removal.
Tighten M12 nuts to a torque of 78 N m (58 lb ft).
Tighten M10 nuts to a torque of 44 N m (33 lb ft).