AVSPARE.COM
parts catalog

BASE AS 2W4235 - Caterpillar


2W4235 BASE AS Caterpillar parts 3116, 3126, 3126B, 3176B, 3208, 3304, 3304B, 3306, 3306B, 3406, 3406B, 3406C, 3408, 3408C, 3412, 3412C, 3412D, C32, C7, C9
Rating:
61
Alternative (cross code) number:
CA2W4235
2W-4235
2W4235
Caterpillar 2W4235 BASE AS
Weight: 2 pounds 0 kg.

Buy BASE AS 2W4235 Caterpillar genuine, new aftermarket tractor parts with delivery
GEN SET ENGINE, MARINE ENGINE,

Compatible equipment models: 2W4235:

GEN SET ENGINE  3406B   3406C   3408   3412  
GENERATOR SET  3406C   3408C   3412C  
INDUSTRIAL ENGINE  3176B   3304   3306   3306B  
Number on catalog scheme: 1
  For full view, you need register

Information:


Illustration 1 g01044774
Remove one bolt (4). Install Tooling (B) and a suitable lifting device to vibration damper (3) and crankshaft pulley (1). The weight of vibration damper (3) and crankshaft pulley (1) is approximately 57 kg (125 lb).
Remove one bolt (2). Install Tooling (A).
Remove remaining bolts (2). Remove vibration damper (3) and crankshaft pulley (1) from the crankshaft.
Remove bolts (4). Remove spacer (5). Remove vibration damper (3) from crankshaft pulley (1). The weight of vibration damper (3) is approximately 34 kg (75 lb). Installation Procedure Type 1
Table 2
Required Tools
Tool Part Number Part Description Qty
A - Guide Stud
(5/8 - 18 NF by 7 inch) 1
B 138-7575 Link Bracket 1
C 4C-5592 Anti-Seize Compound 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Thoroughly inspect the viscous damper for signs of leakage or for signs of a dented (damaged) case. Either of these conditions can cause the weight to make contact with the case. This can affect the viscous damper's operation.
Illustration 2 g01044774
Position vibration damper (3) on crankshaft pulley (1). The weight of vibration damper (3) is approximately 34 kg (75 lb).
Install spacer (5) on the vibration damper. Install bolts (4) and tighten the bolts to a torque of 135 20 N m (100 15 lb ft).
Install Tooling (B) and a suitable lifting device on vibration damper (3) and crankshaft pulley (1). The weight of vibration damper (3) and crankshaft pulley (1) is approximately 57 kg (125 lb). Install the vibration damper and the crankshaft pulley on Tooling (A).
Apply Tooling (C) to bolts (2). Install the bolts. Remove Tooling (A) and install the remaining bolts. Tighten the bolts to a torque of 215 40 N m (159 30 lb ft). Removal Procedure Type 2
Table 3
Required Tools
Tool Part Number Part Description Qty
A - Guide Stud
(5/8 - 18 NF by 7 inch) 1
Illustration 3 g03181887
Remove pulley (1) and the belt. Refer to Belt Tensioner - Remove and Install.
Illustration 4 g03181936
Remove one bolt (2). Install Tooling (A) and a suitable lifting device to vibration damper (4). Remove bolts (2), spacer (3), and vibration damper (4). The weight of vibration damper (4) is approximately 13.7 kg (30.22 lb). Installation Procedure Type 2
Table 4
Required Tools
Tool Part Number Part Description Qty
A - Guide Stud
(5/8 - 18 NF by 7 inch) 1
C 4C-5592 Anti-Seize Compound 1
Illustration 5 g03181936
Install Tooling (A) into the Crankshaft. Position vibration damper (4) onto Tooling (A). The weight of vibration damper (3) is approximately 14 kg (30 lb).
Apply Tooling (C) onto bolts (2). Install spacer (3) and bolts (2).
Illustration 6 g03181887
Install pulley (1). Refer to Belt Tensioner - Remove and Install.

Cat SIS web machinery list:

Caterpillar parts catalog
3412B Marine Engine 60M00001-05160
3304 Marine Engine 13E00300-UP
3306 Marine Engine 84Z00001-UP
3408B Generator Set 78Z01144-04866
3408B Marine Engine 99U04604-07598
3116 Marine Engine 4KG00001-UP
3116 Marine Engine 1SK00001-UP
3208 Marine Engine 01Z21747-UP
3306 Industrial Engine 66D49919-UP
3306 Industrial Engine 64Z05381-UP
3304 Industrial Engine 02B17737-UP
3176B Industrial Engine 3NL00001-UP
3412 Marine Engine 7BL00001-UP
3176B Marine Engine 9WK00001-UP
3126 Marine Engine 8NM00001-UP
3304 Industrial Engine 04B26769-UP
3306B Marine Engine 9SL00001-UP
3304B Marine Engine 8XL00001-UP
3412 Generator Set 81Z05000-14500
3406C Marine Auxiliary and Generator Set 1SS00001-UP
3408C Marine Auxiliary & Generator Set Engine 1TS00001-UP
3412C Marine Auxiliary & Generator Set Engine 9BR00001-UP
3406C Generator Set 1LS00001-UP
3406C Generator Set 4ZR00001-UP
3412C Generator Set 81Z14501-UP
3406C Marine Engine 4TB03482-UP
3406C Generator Set Engine 8FS00001-UP
3126 Marine Engine 6SR00001-UP
3126 Truck Engine ATAAC 8HW00001-UP
3406C Generator Set 9ES00001-UP
3406C Generator Set 2WB11476-UP
3306B Industrial Engine 5GZ00001-UP
3306 Industrial Engine 23C02002-UP
3208 Marine Engine 75V09526-UP
3408C Generator Set 78Z04867-UP
3408C Marine Engine 99U07599-UP
3126 Marine Engine 1ZJ00001-UP
3126 Marine Engine 6MK00001-UP
3126B Marine Engine 9ZF00001-UP
3412C Marine Engine 60M05161-UP
3406C Generator Set KPS00001-UP
C9 Marine Engine CSN00001-UP
3406C Marine Auxiliary Generator Set PFH00001-UP
3408C Marine Auxiliary Generator Set TAM00001-UP
3412C Marine Auxiliary Generator Set RLR00001-UP
3412D Marine Engine REA00001-UP
C7 Marine Engine C7X00001-UP
C32 Marine Engine RXB00001-UP
C32 Marine Engine RNC00001-UP
C7 Marine Engine C7B00001-UP
C7 Marine Engine C7D00001-UP
C7 Marine Engine C7Z00001-UP
3406C Marine Engine 4T700001-UP
3306 Industrial Engine 64Z05381-UP


Parts base Caterpillar catalog:

8N4457 BASE GP-OIL FILTER
120B, 120G, 12G, 12H, 12H ES, 12H NA, 130G, 140B, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 1673C, 215, 215B, 215C, 215D, 219D, 225, 225D, 229, 229D, 235,...
9Y7149 BASE AS-OIL FILTER
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140B, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 1673C, 235B, 235C, 235D, 330, 330 L, 3304, 3304B, 3306, 3306B, 3306C...
2W6681 BASE AS-OIL FILTER
120G, 12G, 130G, 140B, 140G, 14G, 160G, 1673C, 3304, 3304B, 3306, 3306B, 572G, 615C, 627E, 637E, 815B, 936, 963, 973, D250B, D25C, D300B, D30C, D350C, D35C, D6D, D7G, G3304
2P4303 BASE AS-OIL FILTER
3126, 3126B, 3304, 3306, 3306B, 3306C, 3406, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3412, 3412C, 3412D, 3412E, 3456, 350, 3516, 5110B, 621, 621B, 623B, 631D, 631E, 631G, 633E II, 637D, 637E, 637G, 6...
9N3668 BASE AS
16G, 16H NA, 245, 245B, 3116, 3126, 3208, 3304, 3306, 3306B, 3306C, 3406, 3406B, 3406C, 3406E, 3408, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, 3456, 3508B, 3508C, 3512, 3512B, 3512C, 3516B, 3516C, 375,...
4N3295 BASE AS-FUEL FILTER
120G, 12G, 140G, 14G, 215, 215B, 225, 235, 3304, 3304B, 3306, 3306B, 621R, 910, 931C, 941, 950, 966C, 966R, 980B, D3B, D4E SR, D4H, D4HTSK II, D5B, D5HTSK II, D6C, D6D, E180, E240, E300
7N9519 BASE AS-FUEL FILTER
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 235B, 3204, 330, 330 L, 3304, 3304B, 3306, 3306B, 3306C, 330B, 330B L, 350...
8N0803 BASE-FILTER
16H NA, 215, 235, 235B, 3114, 3116, 3204, 330, 330 L, 3304, 3304B, 3306, 3306B, 3306C, 330B, 330B L, 3412, 3412C, 350, 45, 528, 528B, 530B, 545, 572R, 587R, 621E, 621F, 623E, 623F, 627B, 627E, 627F, 6...
8N6199 BASE-PUMP & FILTER
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 215, 3116, 3304, 3304B, 3306, 3306B, 3406B, 578, 583R, 587R, 615, 615C, 81...
7W7824 BASE-FUEL FILTER
120G, 12G, 130G, 140G, 14G, 1673C, 3116, 3208, 3304, 3306, 3306C, 446B, 527, 611, 613C, 613C II, 615C, 631E, 637E, 651E, 657E, 75, 75C, 85C, D5H, D5H XL, D5HTSK II, IT12B, R1700 II, RT100
6I1638 BASE-INJECTOR POSITIONING
140H, 143H, 14H, 160H, 163H, 16H, 3176B, 3176C, 3196, 345B, 345B II, 345B II MH, 345B L, 365B, 365B II, 365B L, 480, 572R II, 65E, 725, 730, 75C, 75D, 75E, 814F, 815F, 816F, 85C, 85D, 85E, 95E, 966G I...
4N5490 BASE ASSEM.
1673C, 3208, 3304, 3306, 518, 528, 627B, 637D, 920, 930, 950, 966C, 977K, D6C, D6D, D7F, D7G
1288557 BASE AS-FILTER
24H, 3126B, 3176C, 3196, 3306, 3306B, 3406E, 3408E, 3412E, 5110B, 525B, 533, 535B, 543, 550, 561N, 570, 572R II, 574, 580, 631D, 631E, 69D, 769C, 769D, 771D, 773B, 773D, 773E, 775D, 775E, 834B, 834G, ...
8N6199 BASE-PUMP & FILTER
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 215, 3116, 3304, 3304B, 3306, 3306B, 3406B, 578, 583R, 587R, 615, 615C, 81...
2W6688 BASE AS-FUEL FILTER
120G, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 3116, 3304, 3304B, 3306, 3306B, 3406B, 578, 583R, 587R, 814F, 815B, 815F, ...
8N0803 BASE-FILTER
16H NA, 215, 235, 235B, 3114, 3116, 3204, 330, 330 L, 3304, 3304B, 3306, 3306B, 3306C, 330B, 330B L, 3412, 3412C, 350, 45, 528, 528B, 530B, 545, 572R, 587R, 621E, 621F, 623E, 623F, 627B, 627E, 627F, 6...
1W6350 BASE AS-FUEL FILTER
3114, 3116, 3204, 330, 3304, 3304B, 3306, 3306B, 3306C, 330B L, 3412, 3412C, 350, 45, 528B, 530B, 545, 621E, 621F, 623E, 623F, 627B, 627E, 627F, 627G, 637E, 637G, 65C, 938F, 950F, 950F II, 960F, 990, ...
7W8834 BASE-FUEL PRIMING PUMP
3126B, 3304, 3304B, 3306, 3306B, 3306C, AD30, C-9, R1300, R1300G
7W7824 BASE-FUEL FILTER
120G, 12G, 130G, 140G, 14G, 1673C, 3116, 3208, 3304, 3306, 3306C, 446B, 527, 611, 613C, 613C II, 615C, 631E, 637E, 651E, 657E, 75, 75C, 85C, D5H, D5H XL, D5HTSK II, IT12B, R1700 II, RT100
7W9026 BASE-OIL COOLER
205B, 3114, 446B, 446D, 918F, 924F, IT12B, IT24F
9X1332 BASE-FAN
120G, 12G, 130G, 140G, 14G, 235B, 416B, 428B, 436, 446B, 528B, 530B, 621G, 623G, 627G, 631G, 637G, 657G, D8R, TH103, TH62, TH63, TH82, TH83
9D8047 BASE AS
12G, 14G, 16G, 416, 416B, 426B, 428B, 446, 446B, 621E, 623E, 627E, 631E, 633E II, 637E, 651E, 657E, 918F, 924F, 928F, 928G, IT18F, IT24F, IT28F, IT28G
2N5848 BASE AS
3114, 3116, 3126, 3160, 3176B, 3176C, 3196, 3208, 3304, 3304B, 3306, 3306B, 3406, 3406B, 3406C, 3408, 3408B, 3408C, 3412, 3412C, 3412D, 3412E, 3508, 3512, 3516, C-10, C-12, C11, C12, C13, C15, C18, C3...
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.