BASE-SEAT 3229481 - Caterpillar

Type 1
Illustration 1 g00674472
(1) Tighten the bolts to the following torque. ... 35 5 N m (4 lb ft)
Illustration 2 g00674542
(2) Put 154-9731 Thread Lock Compound on the last 8 mm (0.3 inch) of the threads at the base end of the stud.Tighten the stud to the following torque. ... 80 15 N m (60 10 lb ft) (3) Put engine oil on the oil filter seal. Put the oil filter in position. Turn the oil filter by hand until the seal makes contact with the base. Rotate the oil filter for an additional 3/4 of a turn in the clockwise direction.Type 2
Illustration 3 g00839891
(1) Put 154-9731 Thread Lock Compound on the last 10 mm (0.4 inch) of the threads at the base end of the stud.Tighten the stud to the following torque. ... 80 15 N m (60 10 lb ft) (2) Put engine oil on the oil filter seal. Put the oil filter in position. Turn the oil filter by hand until the seal makes contact with the base. Rotate the oil filter for an additional 3/4 of a turn in the clockwise direction. (3) 4N-8150 Spring Length under test force ... 55 mm (2.2 inch) Test force ... 75.5 0.6 N (16.97 0.13 lb) Free length after test ... 94 mm (3.7 inch) Outside diameter ... 21 mm (0.8 inch)Type 3
Illustration 4 g00839912
(1) Put 154-9731 Thread Lock Compound on the last 10 mm (0.4 inch) of the threads at the base end of the stud.Tighten the stud to the following torque. ... 80 15 N m (60 10 lb ft) (2) Put engine oil on the oil filter seal. Put the oil filter in position. Turn the oil filter by hand until the seal makes contact with the base. Rotate the oil filter for an additional 3/4 of a turn in the clockwise direction.