BASE AS 3546150 - Caterpillar

Tilt Left or Tilt Right (23) - Squeeze the upper portion of the trigger on the right joystick in order to tilt the bunching head to the left. Squeeze the lower portion of the trigger in order to tilt the bunching head to the right. Joystick Controls (Harvester Head)
Illustration 11 g01121604
Joysticks (Harvester Head) (24) Harvester head (Tilt UP) (25) Carrier (Tilt LEFT) (26) Carrier (Tilt RIGHT) (27) Saw (ON) (28) Find end (29) Top saw (30) Reverse feed (31) Forward feed (32) Extendable stick (OUT) (33) Extendable stick (IN) (34) Pulse open knives (35) Carrier (Tilt FORWARD) (36) Carrier (Tilt BACK) (37) Tilt (DOWN) (38) Pine (39) Quality 1 (40) Spruce (41) Quality 2 (42) Hardwood (43) Quality 3 (44) Length + (45) Quality 4 (46) Length - (47) Quality 5 (48) Feed rollers (OPEN) (49) Slow feed (50) Bottom knives (OPEN) (51) Top knives (OPEN) (52) Reset (53) Knives and feed rollers (CLOSE)The table below describes the functions for the joystick controls (harvester head). Refer to the Owner's Manual, RENR6123 for more information about the joystick controls. For information regarding the Logmate 400D controller, refer to Systems Operation, RENR3078.
Table 1
Button     Name     Function    
24     Tilt up     Tilt the harvester head upward.    
25     Tilt cab LEFT     Tilt the cab left.    
26     Tilt cab RIGHT     Tilt the cab right.    
27     Saw     Activate the saw unit.    
28     Find end     Activate the "end of tree" sensor.    
29     Top saw     Activate the top saw.    
30     Reverse feed     Feed rollers operate in reverse.    
31     Forward feed     Feed rollers operate in forward.    
32
Trigger Switch         Spare    
33
Trigger Switch     Medium Travel Speed     Medium Travel Speed    
34     Pulse open knives     Signal to open delimbing knives    
35     Tilt cab FORWARD     Tilt the cab forward.    
36     Tilt cab BACKWARD     Tilt the cab backward.    
37     Tilt DOWN     Tilt the harvester head downward.    
38     Pine     Choice of trees for cubing functions    
38     Quality 1     Preset button, the button can be programmed to